PPS A310M PPS vs. - Plastic Material Properties Comparison Chart at Plas.com

Electrical performance	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
Dissipation factor	23°C,1MHz	IEC 60250	2E-03
Volume resistivity		IEC 60093	1E+16 ohms·cm
Dielectric strength		IEC 60243-1	22 KV/mm
Inherent resistance of volume		ASTM D-257	10 Ω.m
Dielectric strength		ASTM D-149	15 MV/m
Induced positive connection	10	ASTM D-150	0.002
Arc resistance	W电极	ASTM D-495	182 秒
Dielectric constant	10	ASTM D-150	5.8
		23°C,1MHz	IEC 60250	5.00
			ASTM D150/IEC 60250	5
Volume resistivity		ASTM D257/IEC 60093	1014 Ω.cm
Physical properties	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
Water absorption rate	23°C,24hr	ISO 62	0.020 %
Shrinkage rate		ASTM D955	0.5 %
		垂重方向	东丽法	0.55 %
		TD:3.00mm2	Internal Method	0.50 %
density		ASTM D792/ISO 1183	2.06
Water absorption rate		ASTM D570/ISO 62	0.02 %
	320℃,98MPa,1mm厚，Flow长	东丽法	90
Shrinkage rate	MD:3.00mm4	Internal Method	0.20 %
Shrinkage rate		Flow	东丽法	0.15 %
other	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
characteristic			高硬度
Color			本色.黑
mechanical properties	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
limiting pv value		东丽法	815 KJ/m
shear strength	23°C	JISK7214	60.0 Mpa
Taber abraser	1000Cycles	ISO 9352	70.0 mg
Impact strength of cantilever beam gap	Notched23℃	ASTM D-256	90 J/m
Charpy Notched Impact Strength		ASTM D256/ISO 179	16 kg·cm/cm(J/M)ft·lb/in
bending strength	23°C	ISO 178	200 Mpa
Friction coefficient	对钢	ASTM D-1894	0.30
Elongation at Break		ASTM D-732	60
bending strength		ASTM D-790	17.6 Mpa
bending strength			ASTM D790/ISO 178	200 kg/cm²(MPa)[Lb/in²]
Shore hardness		ASTM D-785	123 洛氏
Rockwell hardness		ASTM D785	123
Bending modulus		ASTM D790/ISO 178	22 kg/cm²(MPa)[Lb/in²]
Impact strength of cantilever beam gap	Unnotched23℃	ASTM D-256	20 KJ/m
Tensile strain	Break,23°C	ISO 527-2	0.80 %
tensile strength	Yield,23°C	ISO 527-2	115 Mpa
abrasion		ASTM D-1044	70 mg/1000回
Elongation at Break		ASTM D638/ISO 527	0.8 %
Bending modulus	23°C	ISO 178	22000 Mpa
Friction coefficient			0.30
tensile strength		ASTM D638/ISO 527	115 kg/cm²(MPa)[Lb/in²]
tensile strength			ASTM D-638	1.2 Mpa
thermal performance	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
Linear coefficient of thermal expansion		ASTM D696/ISO 11359	1.9 mm/mm.℃
Linear coefficient of thermal expansion		Flow	ASTM D-696	1.6
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	260 °C
Melting temperature		ISO 11357-3	278 °C
Linear coefficient of thermal expansion	MD	ISO 11359-2	1.9E-05 cm/cm/°C
Melting temperature		DSC	278 °C
Linear coefficient of thermal expansion	TD	ISO 11359-2	2E-05 cm/cm/°C
Hot deformation temperature	1.82MPa	ASTM D-648	>260 °C
Linear coefficient of thermal expansion	垂重方向	ASTM D-696	2.4
Combustibility (rate)		UL 94	V-0
Combustibility		UL -94	V-0
Melting temperature			278 ℃（℉）
Basic Performance	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
Water absorption rate		ASTM D-570	0.02 %
impact performance	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
Impact strength of simply supported beam without notch	23°C	ISO 179	16 kJ/m²
Supplementary Information	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
BarFlowLength	320°C,1.00mm	Internal Method	9.00 CM
flammability	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
UL flame retardant rating	0.36mm	UL 94	V-0
hardness	شرایط آزمون	روش آزمون	TORAY JAPAN/A310M
Rockwell hardness	R-Scale	ISO 2039-2	123

تماس با ما

دریافت اپلیکیشن

Top