مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPS D5110 CELANESE USA
FORTRON®
کاربردهای خودرو,کاربردهای الکتریکی
تقویت فیبر شیشه ای,مقاومت در برابر دمای بالا
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | CELANESE USA/D5110 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 280 °C |
1.8MPa,Unannealed | ISO 75-2/A | 260 °C | |
Linear coefficient of thermal expansion | TD:-30to30°C | ASTM D696 | 2E-05 cm/cm/°C |
MD:-30to30°C | ASTM D696 | 1.6E-05 cm/cm/°C | |
specific heat | ASTM D790/ISO 178 | 1100 J/kg/°C | |
thermal conductivity | ASTM D790/ISO 178 | 2.0 W/m/K | |
ThermalDiffusivity | ASTM D790/ISO 178 | 0.0126 cm²/s |
mechanical properties | شرایط آزمون | روش آزمون | CELANESE USA/D5110 |
---|---|---|---|
Bending modulus | ISO 178 | 14000 Mpa | |
bending strength | ISO 178 | 150 Mpa | |
Tensile modulus | ISO 527-2 | 14600 Mpa | |
Tensile strain | Break | ISO 527-2 | 0.80 % |
tensile strength | ISO 527-2 | 90.0 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | CELANESE USA/D5110 |
---|---|---|---|
Surface resistivity | ASTM D257 | >2.0E+14 ohms | |
Volume resistivity | ASTM D257 | >3.0E+16 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | CELANESE USA/D5110 |
---|---|---|---|
Shrinkage rate | MD | ISO 294-4 | 0.30 % |
TD | ISO 294-4 | 0.70 % |
impact performance | شرایط آزمون | روش آزمون | CELANESE USA/D5110 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 14 kJ/m² |
flammability | شرایط آزمون | روش آزمون | CELANESE USA/D5110 |
---|---|---|---|
UL flame retardant rating | 1.5mm | UL 94 | V-0 |