مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPS FZ-4020-A4 BK DIC JAPAN
DIC.PPS
--
بسته بندی: مواد تقویت کنن,40 درصد پر کردن بر اساس و
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| Rockwell hardness | M-Scale | ASTM D785 | 100 |
| R-Scale | ASTM D785 | 122 |
| thermal performance | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 270 °C |
| Linear coefficient of thermal expansion | TD:-30to90°C | ASTM D696 | 2.2E-05 cm/cm/°C |
| MD:-30to90°C | ASTM D696 | 2.2E-05 cm/cm/°C |
| mechanical properties | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| Bending modulus | ASTM D790 | 14000 Mpa | |
| bending strength | ASTM D790 | 270 Mpa | |
| compressive strength | ASTM D695 | 200 Mpa | |
| elongation | Break | ASTM D638 | 1.8 % |
| Elongation at Break | ASTM D790 | 2.4 % | |
| Friction coefficient | Steel - Dynamic | ASTM D1894 | 0.35 |
| Steel - Static | ASTM D1894 | 0.35 | |
| Poisson's ratio | 0.36 | ||
| Tensile modulus | ASTM D638 | 15000 Mpa | |
| tensile strength | ASTM D638 | 190 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| Dielectric constant | 1MHz | ASTM D150 | 4.00 |
| Dielectric strength | 1.60mm | ASTM D149 | 16 KV/mm |
| Dissipation factor | 1MHz | ASTM D150 | 4E-03 |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.28 % |
| TD | ASTM D955 | 1.2 % | |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.080 % |
| impact performance | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D256 | 650 J/m |
| flammability | شرایط آزمون | روش آزمون | DIC JAPAN/FZ-4020-A4 BK |
|---|---|---|---|
| UL flame retardant rating | 0.800mm | UL 94 | V-0 |