مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA6 B3 black(2502) AKRO-PLASTIC GERMANY
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| thermal performance | شرایط آزمون | روش آزمون | AKRO-PLASTIC GERMANY/B3 black(2502) |
|---|---|---|---|
| Hot deformation temperature | 1.8 MPa, Unannealed | °C | 60 -- |
| 0.45 MPa, Unannealed | °C | 180 -- | |
| Melting temperature | °C | 220 -- |
| mechanical properties | شرایط آزمون | روش آزمون | AKRO-PLASTIC GERMANY/B3 black(2502) |
|---|---|---|---|
| Bending modulus | MPa | 3100 -- | |
| bending strength | MPa | 120 -- | |
| Tensile modulus | MPa | 3600 1200 | |
| Tensile stress (yield) | MPa | 85 45 |
| Electrical performance | شرایط آزمون | روش آزمون | AKRO-PLASTIC GERMANY/B3 black(2502) |
|---|---|---|---|
| Leakage Traceability Index (Solution A) | V | 600 -- | |
| Surface resistivity | ohms | 1000000000000 10000000000 | |
| Volume resistivity | ohms·cm | 10000000000000 10000000000 |
| Physical properties | شرایط آزمون | روش آزمون | AKRO-PLASTIC GERMANY/B3 black(2502) |
|---|---|---|---|
| density | 23°C | g/cm³ | 1.13 -- |
| flow | % | 1.1 -- | |
| Humidity Absorption - 62% RH | (70°C) | % | 2.6 to 3.4 -- |
| vertical | % | 1 -- | |
| Water absorption rate | (Saturation, 23°C) | % | 9.0 to 10 -- |
| impact performance | شرایط آزمون | روش آزمون | AKRO-PLASTIC GERMANY/B3 black(2502) |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | 无断裂 -- | |
| 23°C | 无断裂 |
| flammability | شرایط آزمون | روش آزمون | AKRO-PLASTIC GERMANY/B3 black(2502) |
|---|---|---|---|
| Burning rate | (> 1.00 mm) | mm/min | < 100 -- |
| Burning wire flammability index | (1.6 mm) | °C | 750 -- |
| Hot filament ignition temperature | (1.6 mm) | °C | 675 -- |
| UL flame retardant rating | 1.6mm | V-2 -- |