مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PFA AP-210 DAIKIN JAPAN
NEOFLON®
پوشش سیم
صبر,عقب نشینی
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
hardness | شرایط آزمون | روش آزمون | DAIKIN JAPAN/AP-210 |
---|---|---|---|
Shore hardness | ShoreD | ASTM D2240 | 60to70 |
thermal performance | شرایط آزمون | روش آزمون | DAIKIN JAPAN/AP-210 |
---|---|---|---|
Linear coefficient of thermal expansion | MD:20to100°C | ASTM D696 | 1.2E-04 cm/cm/°C |
Melting temperature | ASTM D4591 | 300to310 °C | |
specific heat | 1050 J/kg/°C | ||
thermal conductivity | ASTMC177 | 0.26 W/m/K |
mechanical properties | شرایط آزمون | روش آزمون | DAIKIN JAPAN/AP-210 |
---|---|---|---|
Bending modulus | ASTM D790 | 580to690 Mpa | |
bending strength | ASTM D790 | Nobreak | |
Compressive modulus | ASTM D695 | 490to590 Mpa | |
compressive strength | 1%Strain | ASTM D695 | 4.90to5.90 Mpa |
25%Strain | ASTM D695 | 31.4to33.3 Mpa | |
摩擦系数(Steel - Static) | ASTM D695 | 0.040to0.050 | |
elongation | Break | JISK6891 | 350to450 % |
Hot deformation temperature | 100°C,6.9MPa3 | ASTM D621 | 8.50to9.50 % |
100°C,6.9MPa2 | ASTM D621 | 2.00to3.00 % | |
25°C,14MPa3 | ASTM D621 | 8.00to9.00 % | |
25°C,14MPa2 | ASTM D621 | 2.50to3.00 % | |
tensile strength | Yield | JISK6891 | 25.4to30.4 Mpa |
Physical properties | شرایط آزمون | روش آزمون | DAIKIN JAPAN/AP-210 |
---|---|---|---|
Apparent density | JISK6891 | 1.00to1.40 g/cm³ | |
melt mass-flow rate | 372°C/5.0kg | ASTM D1238 | 10to17 g/10min |
Water absorption rate | Saturation | ASTM D570 | <0.010 % |
flammability | شرایط آزمون | روش آزمون | DAIKIN JAPAN/AP-210 |
---|---|---|---|
Extreme Oxygen Index | 1.57mm | ASTM D2863 | >95 % |
UL flame retardant rating | 1.6mm | UL 94 | V-0 |
Filling analysis | شرایط آزمون | روش آزمون | DAIKIN JAPAN/AP-210 |
---|---|---|---|
Melt viscosity | 380°C | 2.00E+6-2.50E+7 mPa·s |