مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPS C-140SF BK IDEMITSU JAPAN
--
سینی پلاستیکی,کاربردهای خودرو
جریان بالا,مقاومت در برابر دمای بالا,بسته بندی: مواد تقویت کنن,40 درصد پر کردن بر اساس و
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| Rockwell hardness | M-Sale | ISO 2039-2 | 101 |
| Supplementary Information | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| Flowability2 | 1.00mm,Flowability | Internal Method | 142 mm |
| thermal performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 271 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 5E-05 cm/cm/°C |
| MD | ISO 11359-2 | 1.6E-05 cm/cm/°C |
| mechanical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| Bending modulus | ISO 178 | 14700 Mpa | |
| bending strength | ISO 178 | 282 Mpa | |
| Tensile strain | Break | ISO 527-2 | 2.9 % |
| tensile strength | ISO 527-2 | 193 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| Dielectric constant | IEC 60250 | 3.90 | |
| Dielectric strength | 3.00mm | IEC 60243-1 | 13 KV/mm |
| Volume resistivity | ASTM D257 | 1E+16 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| density | ISO 1183 | 1.66 g/cm³ | |
| Shrinkage rate | MD | ISO 294-4 | 0.40 % |
| TD | ISO 294-4 | 0.70 % | |
| Water absorption rate | 23°C,24hr | ISO 62 | >0.020 % |
| impact performance | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 11 kJ/m² |
| flammability | شرایط آزمون | روش آزمون | IDEMITSU JAPAN/C-140SF BK |
|---|---|---|---|
| UL flame retardant rating | 0.75mm | UL 94 | V-0 |