plas
ورود

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
ABS S140GHR Polymer Compounders Limited
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونPolymer Compounders Limited/ S140GHR
Hot deformation temperature1.8MPa,UnannealedISO 75-2/Ae85.0 °C
0.45MPa,UnannealedISO 75-2/Be89.0 °C
Linear coefficient of thermal expansionMDISO 11359-29.5E-04 cm/cm/°C
Vicat softening temperatureISO 306/B5094.0 °C
mechanical propertiesشرایط آزمونروش آزمونPolymer Compounders Limited/ S140GHR
bending strengthISO 17868.0 MPa
Tensile modulusISO 527-2/12200 MPa
Tensile strainYield,80°CISO 527-22.4 %
BreakISO 527-212 %
Yield,-40°CISO 527-23.6 %
YieldISO 527-2/502.6 %
tensile strengthYield,80°CISO 527-221.0 MPa
YieldISO 527-2/5049.0 MPa
Yield,-40°CISO 527-266.0 MPa
Physical propertiesشرایط آزمونروش آزمونPolymer Compounders Limited/ S140GHR
densityISO 11831.06 g/cm³
melt mass-flow rate220°C/10.0kgISO 11339.0 g/10min
Shrinkage rateISO 294-40.40to0.70 %
Water absorption rateEquilibrium,23°C,50%RHISO 620.22 %
Saturation,23°CISO 621.0 %
impact performanceشرایط آزمونروش آزمونPolymer Compounders Limited/ S140GHR
Charpy Notched Impact Strength23°CISO 179/1eA24 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A25 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
flammabilityشرایط آزمونروش آزمونPolymer Compounders Limited/ S140GHR
UL flame retardant rating1.5mmUL 94HB
0.8mmUL 94HB