مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PPS P-01 TOSOH JAPAN
SUSTEEL®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
machinability | شرایط آزمون | روش آزمون | TOSOH JAPAN/P-01 |
---|---|---|---|
Shrinkage rate | Across Flow | ASTM D-955 | 0.7 % |
机械方向 | ASTM D-955 | 0.3 % |
thermal performance | شرایط آزمون | روش آزمون | TOSOH JAPAN/P-01 |
---|---|---|---|
Hot deformation temperature | 18.6kg/cm | ASTM D-648 | >260 °C |
Linear coefficient of thermal expansion | 0.37(0.32) W/M.K(kcal/m.hr.℃) | ||
Tosoh Method | 2.0 |
mechanical properties | شرایط آزمون | روش آزمون | TOSOH JAPAN/P-01 |
---|---|---|---|
bending strength | ASTM D-790 | 250(2550) MPa(KG/cm | |
elongation | ASTM D-638 | 1.4 % | |
Impact strength of cantilever beam gap | Unnotched | ASTM D-955 | 343(35) J/m(kg.cm/cm) |
Notched | ASTM D-955 | 59(6) J/m(kg.cm/cm) | |
Rockwell hardness | ASTM D-785 | 123 Rscal | |
Tensile modulus | ASTM D-790 | 17(1.7) | |
tensile strength | ASTM D-638 | 152(1550) MPa(KG/cm |
Electrical performance | شرایط آزمون | روش آزمون | TOSOH JAPAN/P-01 |
---|---|---|---|
Dielectric constant | 1MHz | ASTM D-150 | 4.7 |
Dielectric strength | ASTM D-149 | 14 KV/mm | |
Dissipation factor | 1MHz | ASTM D-150 | 0.0015 |
Volume resistivity | ASTM D-257 | 1×10 Ω.cm |