مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC PC-115P TAIWAN CHIMEI
WONDERLITE®
کاربردهای پزشکی,لوازم جانبی تجهیزات پزشکی
جریان بالا,اشعه های ضد گاما
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | TAIWAN CHIMEI/PC-115P |
---|---|---|---|
Hot deformation temperature | 1.8 MPa, Annealed | ISO 75-2/A | 143 °C |
1.8 MPa, Unannealed | ISO 75-2/A | 128 °C | |
Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 6.0E-5 - 8.0E-5 cm/cm/°C |
Vicat softening temperature | -- | ISO 306/B50 | 145 °C |
-- | ISO 306/A50 | 150 °C |
mechanical properties | شرایط آزمون | روش آزمون | TAIWAN CHIMEI/PC-115P |
---|---|---|---|
Bending modulus | ISO 178 | 2400 Mpa | |
bending strength | ISO 178 | 90.0 Mpa | |
Tensile strain | Break | ISO 527-2/50 | 120 % |
tensile strength | Yield | ISO 527-2/50 | 64.0 Mpa |
Break | ISO 527-2/50 | 70.0 Mpa |
Physical properties | شرایط آزمون | روش آزمون | TAIWAN CHIMEI/PC-115P |
---|---|---|---|
Melt Volume Flow Rate (MVR) | 300°C/1.2 kg | ISO 1133 | 15.0 cm3/10min |
Shrinkage rate | ISO 294-4 | 0.50 - 0.70 % |
flammability | شرایط آزمون | روش آزمون | TAIWAN CHIMEI/PC-115P |
---|---|---|---|
UL flame retardant rating | 2.5 mm | UL 94 | V-2 |
injection | شرایط آزمون | روش آزمون | TAIWAN CHIMEI/PC-115P |
---|---|---|---|
drying temperature | 120 °C | ||
drying time | 4.0 hr | ||
Mold temperature | 70 to 120 °C | ||
Temperature at the front of the material cylinder | 250 to 300 °C | ||
Temperature at the rear of the barrel | 230 to 300 °C | ||
Temperature in the middle of the barrel | 250 to 310 °C |