مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PBT 3300HR CELANESE USA
CELANEX®
زمینه خودرو
تقویت فیبر شیشه ای,سطح ثبات هیدرولیز
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | CELANESE USA/3300HR |
---|---|---|---|
Glass transition temperature | ISO 11357-1 | 60 °C | |
Hot deformation temperature | 0.45Mpa | ISO 75-1/-2 | 225 °C |
1.8Mpa | ISO 75-1/-2 | 205 °C | |
Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 1 E-4/℃ |
Melting temperature | ISO 11357-1 | 225 °C | |
Vicat softening temperature | ISO 306 | 220 °C |
mechanical properties | شرایط آزمون | روش آزمون | CELANESE USA/3300HR |
---|---|---|---|
Bending modulus | 23℃ | ISO 178 | 9200 Mpa |
bending strength | 23℃ | ISO 178 | 210 Mpa |
Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 8.5 KJ/m |
-30℃ | ISO 179/1eA | 8.5 KJ/m | |
Elongation at Break | 5mm/min | ISO 527-2/1A | 2.7 % |
Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 11.7 KJ/m |
Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eU | 46 KJ/m |
-30℃ | ISO 179/1eU | 45 KJ/m | |
Suspended wall beam without notch impact strength | 23℃ | ISO 180/1U | 35 KJ/m |
Tensile modulus | 1mm/min | ISO 527-2/1A | 9200 Mpa |
tensile strength | 5mm/min | ISO 527-2/1A | 139 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | CELANESE USA/3300HR |
---|---|---|---|
Compared to the Leakage Traceability Index (CTI) | IEC 60112 | 425 | |
Dielectric dissipation factor | 100Hz | IEC 60250 | 22 E-4 |
1MHz | IEC 60250 | 160 E-4 | |
Dielectric strength | IEC 60243-1 | 31 KV/mm | |
Surface resistivity | IEC 60093 | >1E15 Ohm | |
Volume resistivity | 1MHz | IEC 60250 | 4.1 |
100Hz | IEC 60250 | 4.5 | |
IE 60093 | >1E13 ohm.m |
Physical properties | شرایط آزمون | روش آزمون | CELANESE USA/3300HR |
---|---|---|---|
density | ISO 1183 | 1540 kg/m | |
Shrinkage rate | Across Flow | ISO 294-4 | 0.3-0.5 % |