plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PA66 AR218V30 BK SOLVAY SHANGHAI
--
--
مقاومت بالا,تقویت فیبر شیشه ای,افزایش
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونSOLVAY SHANGHAI/AR218V30 BK
Hot deformation temperature0.45 MPa, UnannealedISO 75-2/Bf240 °C
1.8 MPa, UnannealedISO 75-2/Af235 °C
Melting temperatureISO 11357-3260 °C
mechanical propertiesشرایط آزمونروش آزمونSOLVAY SHANGHAI/AR218V30 BK
Bending modulus23°CISO 1787000 Mpa
bending strength23°CASTM D790220 Mpa
23°CISO 178200 Mpa
Tensile modulus23°CISO 527-2/1A9900 Mpa
Tensile strainBreak, 23°CISO 527-22.4 %
tensile strengthBreak, 23°CISO 527-2/1A150 Mpa
Physical propertiesشرایط آزمونروش آزمونSOLVAY SHANGHAI/AR218V30 BK
Water absorption rate24 hr, 23°CISO 620.80 %
Saturation, 23°CISO 625.3 %
Equilibrium, 23°C, 50% RHISO 621.7 %
impact performanceشرایط آزمونروش آزمونSOLVAY SHANGHAI/AR218V30 BK
Impact strength of simply supported beam without notch23°CISO 179/1eU45 kJ/m²
Suspended wall beam without notch impact strength23°CISO 180/1U6.0 kJ/m²
flammabilityشرایط آزمونروش آزمونSOLVAY SHANGHAI/AR218V30 BK
Burning wire flammability index1.6 mmIEC 60695-2-12650 °C
Extreme Oxygen IndexISO 4589-223 %
UL flame retardant rating1.6 mmUL 94HB
injectionشرایط آزمونروش آزمونSOLVAY SHANGHAI/AR218V30 BK
drying temperature80 °C
Mold temperature70 to 100 °C
Suggested maximum moisture content0.20 %
Temperature at the front of the material cylinder280 to 290 °C
Temperature at the rear of the barrel270 to 280 °C
Temperature in the middle of the barrel275 to 285 °C