PA4T T11 PA4T vs. - Plastic Material Properties Comparison Chart at Plas.com

mechanical properties	شرایط آزمون	روش آزمون	DSM HOLAND/T11
bending strength		ISO 178	255 Mpa
Tensile strain	Break	ISO 527-2	2.1 %
Bending modulus		ISO 178	11500 Mpa
tensile strength	Break	ISO 527-2	160 Mpa
Tensile modulus		ISO 527-2	12000 Mpa
thermal performance	شرایط آزمون	روش آزمون	DSM HOLAND/T11
RTI Elec	0.35 mm	UL 746	140 °C
Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	5.0E-5 cm/cm/°C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	305 °C
Linear coefficient of thermal expansion	Flow	ISO 11359-2	2.2E-5 cm/cm/°C
Melting temperature		ISO 11357-3	325 °C
Electrical performance	شرایط آزمون	روش آزمون	DSM HOLAND/T11
Volume resistivity		IEC 60093	> 1.0E+15 ohms·cm
Relative permittivity	100 Hz	IEC 60250	4.20
		1 MHz	IEC 60250	3.90
		1.00 GHz	IEC 60250	3.90
Dielectric strength		IEC 60243-1	33 KV/mm
Compared to the anti leakage trace index		IEC 60112	V
Physical properties	شرایط آزمون	روش آزمون	DSM HOLAND/T11
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.6 %
Shrinkage rate	Flow	ISO 294-4	0.30 %
Shrinkage rate		横向Flow	ISO 294-4	1.2 %
flammability	شرایط آزمون	روش آزمون	DSM HOLAND/T11
Flammability level		UL 94	V-0
impact performance	شرایط آزمون	روش آزمون	DSM HOLAND/T11
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	60 kJ/m²

تماس با ما

دریافت اپلیکیشن

Top