مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA6 73G15 DUPONT USA
Zytel®
قطعات خودرو,ماشین آلات صنعتی
ثبات حرارتی,کریستال بالا,بسته بندی: مواد تقویت کنن,15 درصد پر کردن بر اساس و
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | DUPONT USA/73G15 |
---|---|---|---|
Glass transition temperature | ISO 11357-2 | 60.0 °C | |
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 215 °C |
1.8MPa,Unannealed | ISO 75-2/A | 190 °C | |
Melting temperature | ISO 11357-3 | 221 °C |
mechanical properties | شرایط آزمون | روش آزمون | DUPONT USA/73G15 |
---|---|---|---|
Poisson's ratio | ISO 527 | -- | |
Tensile modulus | ISO 527-2 | 5000 Mpa | |
Tensile strain | Break | ISO 527-2 | 5.0 % |
tensile strength | Break | ISO 527-2 | 100 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | DUPONT USA/73G15 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | PLC 0 | |
Dissipation factor | 1MHz | IEC 60250 | 0.016 |
100Hz | IEC 60250 | 0.016 | |
Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | DUPONT USA/73G15 |
---|---|---|---|
MeltViscosity | 280°C,1000sec^-1 | ISO 11443 | 300000 mPa·s |
Shrinkage rate | MD | ISO 294-4 | 0.70 % |
TD | ISO 294-4 | 1.2 % | |
Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 2.4 % |
Saturation,23°C,2.00mm | ISO 62 | 7.5 % |
impact performance | شرایط آزمون | روش آزمون | DUPONT USA/73G15 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 80 kJ/m² |
flammability | شرایط آزمون | روش آزمون | DUPONT USA/73G15 |
---|---|---|---|
Burning rate | 1.00mm | ISO 3795 | <100 mm/min |
Extreme Oxygen Index | ISO 4589-2 | 25 % | |
FMVSS flammability | FMVSS302 | B |