plas
انتخاب‌گر مواد
ورود
دسته‌بندی‌هاهمه
مقایسه مواد
افزودن مدل برای مقایسه
برجسته کردن تفاوت ها
مخفی کردن موارد مشابه

نام محصول / تولیدکننده / مدل

برند

کاربردهای معمول

ویژگی‌ها

رنگ

فرم

روش های پردازش

درجه

پرکننده

بازیافتی

گواهی‌نامه‌ها

قیمت مرجع

PC
PC SABIC INNOVATIVE US LUX7636C-WH5E143X
US$ ۴٬۹۷۳ / MT
FOB Guangzhou port, China
injectionشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
Back pressure0.300 to 0.700 Mpa
Temperature at the front of the material cylinder290 to 310 °C
Screw speed40 to 70 rpm
Mold temperature70 to 95 °C
Processing (melt) temperature290 to 310 °C
Suggested injection volume40 to 60 %
Suggested maximum moisture content0.020 %
Spray nozzle temperature280 to 305 °C
Exhaust hole depth0.025 to 0.076 mm
drying temperature120 °C
Temperature in the middle of the barrel275 to 300 °C
drying time3.0 to 4.0 hr
Temperature at the rear of the barrel265 to 290 °C
mechanical propertiesشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
bending strength--5,6ISO 178103 Mpa
Bending modulus50.0 mm Span4ASTM D7902400 Mpa
bending strengthYield, 50.0 mm Span4ASTM D790106 Mpa
elongationBreakISO 527-2/5023 %
Yield3ASTM D6386.0 %
YieldISO 527-2/506.0 %
Break3ASTM D63851 %
tensile strengthBreakISO 527-2/5052.0 Mpa
YieldISO 527-2/5067.0 Mpa
Yield3ASTM D63868.0 Mpa
Tensile modulus--2ASTM D6382500 Mpa
--ISO 527-2/12400 Mpa
Bending modulus--5ISO 1782500 Mpa
tensile strengthBreak3ASTM D63852.0 Mpa
flammabilityشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
UL flame retardant rating0.40 mmUL 94V-2
3.0 mmUL 945VA
Hot filament ignition temperature1.0 mmIEC 60695-2-13875 °C
Burning wire flammability index1.0 mmIEC 60695-2-12960 °C
UL flame retardant rating1.0 mmUL 94V-0
thermal performanceشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
Linear coefficient of thermal expansionAcross Flow : -40 to 40°CASTM E8317.0E-5 cm/cm/°C
Hot deformation temperature1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9ISO 75-2/Ae120 °C
0.45 MPa, Unannealed, 3.20 mmASTM D648131 °C
Linear coefficient of thermal expansionFlow : -40 to 40°CASTM E8316.6E-5 cm/cm/°C
Hot deformation temperature0.45 MPa, Unannealed, 4.00 mm, 100 mm Span9ISO 75-2/Be131 °C
Linear coefficient of thermal expansionFlow : 23 to 80°CISO 11359-27.2E-5 cm/cm/°C
Vicat softening temperature--ISO 306/B50137 °C
RTI ElecUL 746125 °C
RTI ImpUL 746120 °C
Linear coefficient of thermal expansionAcross Flow : 23 to 80°CISO 11359-27.6E-5 cm/cm/°C
RTIUL 746125 °C
Hot deformation temperature1.8 MPa, Unannealed, 3.20 mmASTM D648120 °C
Vicat softening temperature--ISO 306/B120139 °C
Ball Pressure Test123 to 127°CIEC 60695-10-2通过
Vicat softening temperature--ASTM D152510136 °C
Physical propertiesشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
Shrinkage rateAcross FlowFlow : 3.20 mmInternal Method0.60 - 0.80 %
Water absorption rateSaturation, 23°CISO 620.14 %
Melt Volume Flow Rate (MVR)300°C/1.2 kgISO 11335.00 cm3/10min
Shrinkage rateFlow : 3.20 mmInternal Method0.55 - 0.75 %
Water absorption rateEquilibrium, 23°C, 50% RHISO 620.11 %
Outdoor applicabilityUL 746Cf1
melt mass-flow rate300°C/1.2 kgASTM D12385.0 g/10 min
impact performanceشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
Suspended wall beam without notch impact strength23°CASTM D4812无断裂
Impact strength of simply supported beam without notch-30°CISO 179/1eU无断裂
Charpy Notched Impact Strength-30°CISO 179/1eA9.0 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU无断裂
Dart impact23°C, Total EnergyASTM D376366.0 J
Charpy Notched Impact Strength23°CISO 179/1eA10 kJ/m²
Suspended wall beam without notch impact strength-30°CASTM D4812无断裂
Electrical performanceشرایط آزمونروش آزمونSABIC INNOVATIVE US/LUX7636C-WH5E143X
Dielectric constant1.10 GHzASTM ES7-832.79
Dissipation factor1.10 GHzASTM ES7-835.8E-3

تماس با ما

دریافت اپلیکیشن

Top