مقایسه مواد

اطلاعات محصول

نام محصول

نام برند

کاربردها

ویژگی‌ها

گواهی‌نامه‌ها

PC/PBT X4850-78211 SABIC INNOVATIVE US

XENOY™

کاربردهای خودرو

جریان بالا,مقاومت بالا,پایدار اندازه

برگه‌های اطلاعات پلاستیک

hardness	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/X4850-78211
Ball Pressure Test	H358/30	ISO 2039-1	105 Mpa

thermal performance	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/X4850-78211
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	101 °C
		0.45MPa,Unannealed,64.0mmSpan	ISO 75-2/Bf	121 °C
		1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	99.0 °C
		0.45MPa,Unannealed,3.20mm	ASTM D648	125 °C
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	5.2E-05 cm/cm/°C
		TD：-40to40°C	ASTME831	7.5E-05 cm/cm/°C
		MD：-30to80°C	ISO 11359-2	6.3E-05 cm/cm/°C
		TD：-30to80°C	ISO 11359-2	8.1E-05 cm/cm/°C
thermal conductivity		ISO 8302	0.20 W/m/K
Vicat softening temperature		ASTM D152511	134 °C
		--	ISO 306/B120	135 °C
		--	ISO 306/B50	133 °C

mechanical properties	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/X4850-78211
Bending modulus	50.0mmSpan	ASTM D790	3700 Mpa
Bending modulus			ISO 178	3500 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	99.0 Mpa
bending strength			ISO 178	94.0 Mpa
elongation	Break4	ASTM D638	130 %
		Break3	ASTM D638	140 %
		Yield	ASTM D638	3.7 %
Taber abraser	1000Cycles,1000g,CS-17Wheel	Internal Method	30.0 mg
Tensile modulus		ASTM D638	4000 Mpa
Tensile modulus			ISO 527-2/1	3850 Mpa
Tensile strain	Break	ISO 527-2/5	80 %
		Break	ISO 527-2/50	30 %
		Yield	ISO 527-2/5	3.4 %
		Yield	ISO 527-2/50	3.5 %
tensile strength	Break	ISO 527-2/5	50.0 Mpa
		Yield	ASTM D638	65.0 Mpa
		Yield	ISO 527-2/50	63.0 Mpa
		Break	ISO 527-2/50	45.0 Mpa
		Break4	ASTM D638	55.0 Mpa
		Yield	ISO 527-2/5	58.0 Mpa
		Break3	ASTM D638	60.0 Mpa

Physical properties	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/X4850-78211
melt mass-flow rate	266°C/5.0kg	ASTM D1238	4.5 g/10min
Melt Volume Flow Rate (MVR)	265°C/5.0kg	ISO 1133	4.00 cm3/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.70-0.90 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.14 %
Water absorption rate		Saturation,23°C	ISO 62	0.42 %

impact performance	شرایط آزمون	روش آزمون	SABIC INNOVATIVE US/X4850-78211
Charpy Notched Impact Strength	23°C	ISO 179/1eA	20 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	11 kJ/m²
Dart impact	-20°C,TotalEnergy	ASTM D3763	60.0 J
Dart impact		23°C,TotalEnergy	ASTM D3763	60.0 J
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	7.0 kJ/m²
		23°C	ISO 180/1A	20 kJ/m²
		0°C	ISO 180/1A	11 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	NoBreak
Multi axis Instrumented Impact Energy		ISO 6603-2	100 J
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	NoBreak
Suspended wall beam without notch impact strength		23°C	ISO 180/1U	NoBreak

تماس با ما

دریافت اپلیکیشن

Top