مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PA12 55R53 SP 01 ARKEMA USA
Pebax®Rnew®
کاربردهای خودرو,لوله
مقاومت در برابر اشعه ماور,ثبات حرارتی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| Shore hardness | Shore D, 15 Sec | ISO 7619-1 | 51 |
| thermal performance | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| Melting temperature | ISO 11357-3 | 167 °C | |
| Renewable Carbon Conent | CSA LISTED | 62 to 66 % | |
| Vicat softening temperature | ISO 306/B50 | 156 °C |
| mechanical properties | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | -- Mpa | |
| Tensile strain | Break | ISO 527-2 | > 300 % |
| tensile strength | 50% Strain | ISO 527-2 | -- Mpa |
| Break | ISO 527-2 | 45.0 Mpa |
| Physical properties | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| Shrinkage rate | 横向Flow | ISO 294-4 | 1.0 % |
| Flow | ISO 294-4 | 1.0 % | |
| Water absorption rate | Saturation, 23°C | ISO 62 | 1.5 % |
| Equilibrium, 23°C, 50% RH | ISO 62 | 0.70 % |
| impact performance | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| 23°C | ISO 179/1eU | 无断裂 |
| squeeze out | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| drying temperature | 65 to 75 °C | ||
| drying time | 4.0 to 8.0 hr | ||
| Melt Temperature | 200 to 270 °C |
| injection | شرایط آزمون | روش آزمون | ARKEMA USA/55R53 SP 01 |
|---|---|---|---|
| drying temperature | 65 to 75 °C | ||
| drying time | 4.0 to 8.0 hr | ||
| Mold temperature | 25 to 60 °C | ||
| Processing (melt) temperature | 210 to 230 °C |