مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC EXL9414T 7A1D064SL SABIC INNOVATIVE NANSHA
LEXAN™
نمایشگر الکترونیکی,شارژ سریع گوشی
جریان بالا,گسترش بالا در دمای پایین
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
Hot deformation temperature | 1.8 MPa, Unannealed, 3.20 mm | ASTM D648 | 120 °C |
1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span9 | ISO 75-2/Af | 116 °C | |
Linear coefficient of thermal expansion | Across Flow : -40 to 95°C | ASTM E831 | 8.0E-5 cm/cm/°C |
Flow : 23 to 80°C | ISO 11359-2 | 6.7E-5 cm/cm/°C | |
Flow : -40 to 95°C | ASTM E831 | 6.7E-5 cm/cm/°C | |
Across Flow : 23 to 80°C | ISO 11359-2 | 8.0E-5 cm/cm/°C | |
Vicat softening temperature | -- | ISO 306/B120 | 139 °C |
-- | ASTM D152510 | 138 °C |
mechanical properties | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
Bending modulus | --5 | ISO 178 | 2120 Mpa |
50.0 mm Span4 | ASTM D790 | 2180 Mpa | |
bending strength | Yield, 50.0 mm Span4 | ASTM D790 | 92.0 Mpa |
--5,6 | ISO 178 | 88.0 Mpa | |
elongation | Yield | ISO 527-2/50 | 5.4 % |
Yield3 | ASTM D638 | 5.6 % | |
Break3 | ASTM D638 | 120 % | |
Break | ISO 527-2/50 | 110 % | |
Tensile modulus | --2 | ASTM D638 | 2180 Mpa |
-- | ISO 527-2/1 | 2300 Mpa | |
tensile strength | Yield | ISO 527-2/50 | 56.0 Mpa |
Break | ISO 527-2/50 | 55.0 Mpa | |
Break3 | ASTM D638 | 59.0 Mpa | |
Yield3 | ASTM D638 | 57.0 Mpa |
Physical properties | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
melt mass-flow rate | 300°C/1.2 kg | ASTM D1238 | 13 g/10 min |
Melt Volume Flow Rate (MVR) | 300°C/1.2 kg | ISO 1133 | 12.0 cm3/10min |
Shrinkage rate | 3.20 mm,Flow | Internal Method | 0.40 - 0.80 % |
Water absorption rate | Saturation, 23°C | ISO 62 | 0.12 % |
Equilibrium, 23°C, 50% RH | ISO 62 | 0.090 % |
impact performance | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 70 kJ/m² |
-30°C | ISO 179/1eA | 60 kJ/m² | |
Dart impact | 23°C, Total Energy | ASTM D3763 | 75.0 J |
Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
23°C | ISO 179/1eU | 无断裂 | |
Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 无断裂 |
23°C | ISO 180/1U | 无断裂 |
flammability | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
Extreme Oxygen Index | ISO 4589-2 | 36 % | |
UL flame retardant rating | 1.8 mm | UL 94 | V-0 |
1.5 mm | UL 94 | V-1 |
optical performance | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
transmissivity | 2000 μm | Internal Method | 84.0 % |
turbidity | 2000 μm | Internal Method | 3.0 % |
injection | شرایط آزمون | روش آزمون | SABIC INNOVATIVE NANSHA/EXL9414T 7A1D064SL |
---|---|---|---|
Back pressure | 0.300 to 0.700 Mpa | ||
drying temperature | 120 °C | ||
drying time | 3.0 to 4.0 hr | ||
Exhaust hole depth | 0.025 to 0.076 mm | ||
Mold temperature | 70 to 95 °C | ||
Processing (melt) temperature | 295 to 315 °C | ||
Screw speed | 40 to 70 rpm | ||
Spray nozzle temperature | 290 to 310 °C | ||
Suggested injection volume | 40 to 60 % | ||
Suggested maximum moisture content | 0.020 % | ||
Temperature at the front of the material cylinder | 295 to 315 °C | ||
Temperature at the rear of the barrel | 270 to 295 °C | ||
Temperature in the middle of the barrel | 280 to 305 °C |