مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PEK G-PAEK™ 1230FC Gharda Chemicals Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| Rockwell hardness | M-Scale,23°C | ASTM D785 | 106 |
| Shore hardness | ShoreD,23°C | ASTM D2240 | 91 |
| thermal performance | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| Continuous use temperature | UL 746B | 280 °C | |
| Glass transition temperature | ASTM D3418 | 152 °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 349 °C |
| Melting temperature | ASTM D3418 | 372 °C |
| mechanical properties | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| Bending modulus | 23°C | ASTM D790 | 10500 MPa |
| bending strength | 23°C | ASTM D790 | 210 MPa |
| elongation | Break,23°C | ASTM D638 | 1.5to2.0 % |
| Friction coefficient | 0.17 | ||
| Tensile modulus | 23°C | ASTM D638 | 11500 MPa |
| tensile strength | Yield,23°C | ASTM D638 | 140 MPa |
| Electrical performance | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| Surface resistivity | ASTM D257 | 1E+09 ohms |
| Physical properties | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| density | 1.45 g/cm³ | ||
| Shrinkage rate | TD | 0.50 % | |
| MD | 0.11 % | ||
| Water absorption rate | Equilibrium | ASTM D570 | 0.050 % |
| impact performance | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 45 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 610 J/m |
| flammability | شرایط آزمون | روش آزمون | Gharda Chemicals Ltd./G-PAEK™ 1230FC |
|---|---|---|---|
| UL flame retardant rating | 0.800mm | UL 94 | V-0 |