مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PC/ABS FR3010HR 000000 COVESTRO GERMANY
Bayblend®
بسته بندی پزشکی
مقاوم در برابر گرما,ضد شیمیایی,عقب نشینی
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
thermal performance | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 100 °C |
1.8MPa,Unannealed | ISO 75-2/A | 90.0 °C | |
Linear coefficient of thermal expansion | TD:23to55°C | ISO 11359-2 | 8E-05 cm/cm/°C |
MD:23to55°C | ISO 11359-2 | 7.6E-05 cm/cm/°C | |
Vicat softening temperature | -- | ISO 306/B120 | 110 °C |
-- | ISO 306/B50 | 108 °C |
mechanical properties | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
Tensile modulus | 23°C | ISO 527-2/1 | 2700 Mpa |
Tensile strain | Yield,23°C | ISO 527-2/50 | 4.0 % |
Break,23°C | ISO 527-2/50 | >50 % | |
tensile strength | Break,23°C | ISO 527-2/50 | 50.0 Mpa |
Yield,23°C | ISO 527-2/50 | 60.0 Mpa |
Electrical performance | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
Compared to the anti leakage trace index | SolutionA | IEC 60112 | PLC 2 |
Dielectric strength | 23°C,1.00mm | IEC 60243-1 | 35 KV/mm |
Dissipation factor | 23°C,100Hz | IEC 60250 | 5E-03 |
23°C,1MHz | IEC 60250 | 7E-03 | |
Relative permittivity | 23°C,1MHz | IEC 60250 | 3.10 |
23°C,100Hz | IEC 60250 | 3.20 | |
Surface resistivity | IEC 60093 | 1E+16 ohms | |
Volume resistivity | 23°C | IEC 60093 | 1E+16 ohms·cm |
Physical properties | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
density | 23°C | ISO 1183 | 1.18 g/cm³ |
Melt Volume Flow Rate (MVR) | 240°C/5.0kg | ISO 1133 | 15.0 cm3/10min |
Shrinkage rate | TD:240°C,3.00mm | ISO 2577 | 0.50-0.70 % |
MD:240°C,3.00mm | ISO 2577 | 0.50-0.70 % | |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.20 % |
Saturation,23°C | ISO 62 | 0.50 % |
impact performance | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
Impact strength of cantilever beam gap | -30°C | ISO 180/A | 10 kJ/m² |
23°C | ISO 180/A | 35 kJ/m² | |
Suspended wall beam without notch impact strength | 23°C | ISO 180 | 无断裂 |
flammability | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
UL flame retardant rating | 3.0mm | UL 94 | 5VA |
2.0mm | UL 94 | 5VB | |
1.5mm | UL 94 | V-0 |
Filling analysis | شرایط آزمون | روش آزمون | COVESTRO GERMANY/FR3010HR 000000 |
---|---|---|---|
MeltViscosity | 260°C | ISO 11443-A | 245 Pa·s |