مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PBT 3300 JAPAN POLYPLASTIC
DURANEX®
زمینه خودرو
تقویت فیبر شیشه ای
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| hardness | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 100 |
| Supplementary Information | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| ColourNumber | EF2001/ED3002 |
| thermal performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 213 ℃(℉) |
| 1.8MPa,Unannealed | ISO 75-2/A | 213 °C | |
| 1.82MPa | ASTM D-648 | 213 °C | |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 2E-05 cm/cm/°C |
| ASTM D696/ISO 11359 | 2-7 mm/mm.℃ | ||
| TD:23to55°C | Internal Method | 9E-05 cm/cm/°C | |
| Linear expansion coefficient (room temperature) | 2-7 | ||
| UL flame retardant rating | UL 94 | HB |
| mechanical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| Bending modulus | ASTM D-790 | 9120 Mpa | |
| ISO 178 | 9030 Mpa | ||
| ASTM D790/ISO 178 | 9120 kg/cm²(MPa)[Lb/in²] | ||
| bending strength | ISO 178 | 220 Mpa | |
| ASTM D790/ISO 178 | 210 kg/cm²(MPa)[Lb/in²] | ||
| ASTM D-790 | 210 Mpa | ||
| Charpy Notched Impact Strength | ASTM D256/ISO 179 | 93 kg·cm/cm(J/M)ft·lb/in | |
| elongation | ASTM D-638 | 2.5 % | |
| Elongation at Break | ASTM D638/ISO 527 | 2.5 % | |
| Impact strength of cantilever beam gap | Notched侧 | ASTM D-256 | 93 J/m |
| 反Notched侧 | ASTM D-256 | 530 J/m | |
| Tensile strain | Break | ISO 527-2 | 2.2 % |
| tensile strength | ASTM D638/ISO 527 | 132 kg/cm²(MPa)[Lb/in²] | |
| ISO 527-2 | 140 Mpa | ||
| ASTM D-638 | 132 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| Compared to the anti leakage trace index | IEC 60112 | PLC 2 | |
| Dielectric strength | 3.00mm | IEC 60243-1 | 23 KV/mm |
| 2mmt | ASTM D-149 | 23 MV/m | |
| Volume resistivity | IEC 60093 | 5E+16 ohms·cm | |
| 3mmt | ASTM D-257 | 5×10 Ω.cm | |
| ASTM D257/IEC 60093 | 5×1016 Ω.cm |
| Physical properties | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.53 | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.10 % |
| flammability | شرایط آزمون | روش آزمون | JAPAN POLYPLASTIC/3300 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |