مقایسه مواد
اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگیها
گواهینامهها

PTFE M-18 DAIKIN JAPAN
POLYFLON™
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
برگههای اطلاعات پلاستیک
| Supplementary Information | شرایط آزمون | روش آزمون | DAIKIN JAPAN/M-18 |
|---|---|---|---|
| MITFlexuralLife | ASTM D2178 | 5E+06 | |
| StretchingVoidIndex | ASTM D4895 | 300 |
| thermal performance | شرایط آزمون | روش آزمون | DAIKIN JAPAN/M-18 |
|---|---|---|---|
| Continuous use temperature | 260 °C | ||
| Melting temperature | DSC | 327 °C |
| mechanical properties | شرایط آزمون | روش آزمون | DAIKIN JAPAN/M-18 |
|---|---|---|---|
| compressive strength | 1%Strain3 | ASTM D695 | 5.00 Mpa |
| 0%Strain2 | ASTM D695 | 7.80 Mpa | |
| 25%Strain3 | ASTM D695 | 28.1 Mpa | |
| elongation | Break,1.50mm | ASTM D4894 | 400 % |
| Hot deformation temperature | 25°C,14MPa | ASTM D621 | 17.2 % |
| 100°C,14MPa | ASTM D621 | 33.3 % | |
| 200°C,6.9MPa | ASTM D621 | 27.0 % | |
| tensile strength | Yield,1.50mm | ASTM D4894 | 43.0 Mpa |
| Electrical performance | شرایط آزمون | روش آزمون | DAIKIN JAPAN/M-18 |
|---|---|---|---|
| Dielectric constant | 1kHz | ASTM D150 | <2.10 |
| Dielectric strength | 100 KV/mm | ||
| Dissipation factor | 1kHz | ASTM D150 | <1.0E-4 |
| Surface resistivity | ASTM D257 | >1.0E+15 ohms | |
| Volume resistivity | ASTM D257 | >1.0E+18 ohms·cm |
| Physical properties | شرایط آزمون | روش آزمون | DAIKIN JAPAN/M-18 |
|---|---|---|---|
| Apparent density | ASTM D4894 | 0.48 g/cm³ | |
| Shrinkage rate | MD | Internal Method | 3.2 % |
| elastomer | شرایط آزمون | روش آزمون | DAIKIN JAPAN/M-18 |
|---|---|---|---|
| Permanent compression deformation | 100°C4 | ASTM D621 | 20 % |
| 25°C4 | ASTM D621 | 8.6 % | |
| 200°C5 | ASTM D621 | 16 % |