plas

مقایسه مواد

اطلاعات محصول
نام محصول
نام برند
کاربردها
ویژگی‌ها
گواهی‌نامه‌ها
PC PC-1000L LOTTE KOREA
HOPELEX 
زمینه خودرو,آینه توزیع خودرو
آسان جدا کردن
TDS
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

برگه‌های اطلاعات پلاستیک

thermal performanceشرایط آزمونروش آزمونLOTTE KOREA/PC-1000L
Hot deformation temperature1.8 MPa, UnannealedASTM D648130 °C
0.45 MPa, UnannealedASTM D648141 °C
Vicat softening temperatureASTM D15255150 °C
mechanical propertiesشرایط آزمونروش آزمونLOTTE KOREA/PC-1000L
Bending modulusASTM D7902350 Mpa
bending strengthYieldASTM D79090.2 Mpa
elongationBreakASTM D638> 100 %
tensile strengthYieldASTM D63861.8 Mpa
Physical propertiesشرایط آزمونروش آزمونLOTTE KOREA/PC-1000L
melt mass-flow rate300°C/1.2 kgASTM D123815 g/10 min
Shrinkage rateFlowASTM D9550.50 - 0.70 %
optical performanceشرایط آزمونروش آزمونLOTTE KOREA/PC-1000L
Refractive indexASTM D5421.585
transmissivityASTM D100389.0 %
turbidityASTM D1003< 0.80 %
injectionشرایط آزمونروش آزمونLOTTE KOREA/PC-1000L
drying temperature120 °C
drying time4.0 hr
Hopper temperature60 to 80 °C
Mold temperature60 to 90 °C
Processing (melt) temperature290 to 310 °C
Spray nozzle temperature280 to 300 °C
Suggested maximum material return ratio20 %
Suggested maximum moisture content0.020 %
Temperature at the front of the material cylinder270 to 290 °C
Temperature at the rear of the barrel290 to 310 °C
Temperature in the middle of the barrel280 to 300 °C