برگه داده فنی مقایسهflammability شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating 3.0 mm UL 94 V-0 UL flame retardant rating 1.6 mm UL 94 V-0 5VB UL flame retardant rating 1.0 mm UL 94 V-0 UL flame retardant rating 0.75 mm UL 94 V-0
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون bending strength 23°C, 3.20 mm, Injection ASTM D790 90.2 Mpa Bending modulus 23°C, 3.20 mm, Injection ASTM D790 2350 Mpa elongation Break, 23°C, 3.20 mm, Injection ASTM D638 > 100 % tensile strength Yield, 23°C, 3.20 mm, Injection ASTM D638 60.8 Mpa
injection شرایط آزمون روش آزمون نتیجه آزمون Temperature at the front of the material cylinder 255 to 265 °C Spray nozzle temperature 260 to 270 °C Processing (melt) temperature 255 to 270 °C Mold temperature 40 to 80 °C Temperature in the middle of the barrel 250 to 260 °C Temperature at the rear of the barrel 245 to 255 °C Suggested maximum moisture content 0.020 % drying time 4.0 to 6.0 hr drying temperature 120 °C
thermal performance شرایط آزمون روش آزمون نتیجه آزمون RTI UL 746 120 °C RTI Imp UL 746 120 °C RTI Elec UL 746 120 °C Melting temperature ASTM D3418 250 °C Hot deformation temperature 1.8 MPa, Unannealed, 6.40 mm, Injection ASTM D648 110 °C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Water absorption rate 24 hr, 23°C ASTM D570 0.10 % Shrinkage rate 23°C, Injection,Flow ASTM D955 0.60 - 1.0 % melt mass-flow rate 265°C/2.16 kg ASTM D1238 14 g/10 min
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Compared to the anti leakage trace index UL 746 PLC 0 Arc resistance ASTM D495 PLC 7 Volume resistivity 23°C ASTM D257 1.0E+17 ohms·cm
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.