برگه داده فنی مقایسهimpact performance شرایط آزمون روش آزمون نتیجه آزمون Suspended wall beam without notch impact strength 6.40 mm ASTM D256 350 J/m
flammability شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating 0.30 mm UL 94 V-0 Extreme Oxygen Index ISO 527-1 48 % Solder resistance Internal Method 290 °C
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون Bending modulus 23°C ASTM D790 9400 Mpa bending strength 23°C ASTM D790 120 Mpa tensile strength ASTM D638 100 Mpa elongation Break ASTM D638 5.0 %
injection شرایط آزمون روش آزمون نتیجه آزمون drying temperature 130 °C drying time 4.0 to 24 hr Injection pressure 80.0 to 160 Mpa Injection speed 中等偏快 Maintain pressure 20.0 to 40.0 Mpa Temperature at the front of the material cylinder 340 to 360 °C Spray nozzle temperature 340 to 360 °C Processing (melt) temperature 350 °C Mold temperature 40 to 160 °C Back pressure 1.00 to 5.00 Mpa Screw speed 50 to 100 rpm Temperature at the rear of the barrel 280 to 320 °C Temperature in the middle of the barrel 320 to 340 °C
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 1.8 MPa, Unannealed ASTM D648 240 °C Linear coefficient of thermal expansion Flow : 150°C Internal Method 1.0E-5 cm/cm/°C Linear coefficient of thermal expansion Across Flow : 150°C Internal Method 6.2E-5 cm/cm/°C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Shrinkage rate 横向Flow Internal Method 1.0 % Shrinkage rate Flow Internal Method 0.22 % Water absorption rate Saturation ASTM D570 0.020 %
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Dissipation factor 1.00 GHz ASTM D150 4.0E-3 Arc resistance ASTM D495 132 sec Compared to the anti leakage trace index IEC 60112 V Volume resistivity ASTM D257 1.0E+15 ohms·cm Dielectric constant 1 MHz ASTM D150 3.80 Dielectric constant 1.00 GHz ASTM D150 3.40 Dissipation factor 1 MHz ASTM D150 0.033
hardness شرایط آزمون روش آزمون نتیجه آزمون Rockwell hardness R-Scale ASTM D785 96
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.