Impact strength of simply supported beam without notch
-30°C
ISO 179/1eU
无断裂
Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
无断裂
flammability
شرایط آزمون
روش آزمون
نتیجه آزمون
UL flame retardant rating
0.40 mm
UL 94
V-0
UL flame retardant rating
0.8 mm
UL 94
V-0
UL flame retardant rating
1.6 mm
UL 94
V-0
UL flame retardant rating
3.2 mm
UL 94
V-0
Burning wire flammability index
0.8 mm
IEC 60695-2-12
960 °C
Burning wire flammability index
3.2 mm
IEC 60695-2-12
960 °C
Hot filament ignition temperature
0.8 mm
IEC 60695-2-13
775 °C
Hot filament ignition temperature
3.2 mm
IEC 60695-2-13
800 °C
Extreme Oxygen Index
ISO 4589-2
30 %
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Tensile modulus
23°C
ISO 527-2
10000 Mpa
tensile strength
Yield, 23°C
ISO 527-2
135 Mpa
Tensile strain
Break, 23°C
ISO 527-2
2.5 %
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Hot deformation temperature
0.45 MPa, Unannealed
ISO 75-2/B
220 °C
Hot deformation temperature
1.8 MPa, Unannealed
ISO 75-2/A
210 °C
Continuous use temperature
IEC 60216
130 °C
Ball Pressure Test
125°C
IEC 60695-10-2
通过
Ball Pressure Test
165°C
IEC 60695-10-2
通过
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Shrinkage rate
横向Flow : 23°C
ISO 294-4
1.0 %
Shrinkage rate
Flow : 23°C
ISO 294-4
0.30 %
Water absorption rate
24 hr, 23°C
ISO 62
1.5 %
Water absorption rate
Saturation, 23°C
ISO 62
4.5 %
Electrical performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Surface resistivity
IEC 60093
1.0E+13 ohms
Volume resistivity
23°C
IEC 60093
1.0E+15 ohms·cm
Dielectric strength
2.00 mm
IEC 60243-1
19 KV/mm
Compared to the anti leakage trace index
3.20 mm, Solution A
IEC 60112
PLC 0
Needle flame test
1.00 mm
IEC 60695-11-5
通过
Needle flame test
2.00 mm
IEC 60695-11-5
通过
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.