Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
48 kJ/m²
Suspended wall beam without notch impact strength
23°C
ISO 180/1U
61 kJ/m²
flammability
شرایط آزمون
روش آزمون
نتیجه آزمون
UL flame retardant rating
UL 94
V-0
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Tensile modulus
ISO 527-2/1A
12000 Mpa
tensile strength
Break
ISO 527-2/1A/5
200 Mpa
Tensile strain
Break
ISO 527-2/1A/5
3.1 %
Bending modulus
23°C
ISO 178
12400 Mpa
bending strength
23°C
ISO 178
250 Mpa
Compressive modulus
ISO 604
10000 Mpa
Compressive stress
1% Strain
ISO 604
85.0 Mpa
injection
شرایط آزمون
روش آزمون
نتیجه آزمون
drying temperature
150 °C
drying time
4.0 to 6.0 hr
Suggested maximum moisture content
0.010 %
Hopper temperature
20 to 30 °C
Temperature at the rear of the barrel
270 to 280 °C
Temperature in the middle of the barrel
275 to 285 °C
Temperature at the front of the material cylinder
280 to 290 °C
Spray nozzle temperature
290 to 300 °C
Processing (melt) temperature
285 to 295 °C
Mold temperature
80 to 120 °C
Injection speed
快速
Back pressure
< 3.00 Mpa
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Hot deformation temperature
0.45 MPa, Unannealed
ISO 75-2/B
250 °C
Hot deformation temperature
1.8 MPa, Unannealed
ISO 75-2/A
230 °C
Hot deformation temperature
8.0 MPa, Unannealed
ISO 75-2/C
157 °C
Vicat softening temperature
ISO 306/B50
162 °C
Melting temperature
ISO 11357-3
280 °C
Linear coefficient of thermal expansion
Flow
ISO 11359-2
1.0E-5 cm/cm/°C
Linear coefficient of thermal expansion
Across Flow
ISO 11359-2
1.8E-5 cm/cm/°C
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Shrinkage rate
横向Flow
ISO 294-4
0.40 %
Shrinkage rate
Flow
ISO 294-4
0.10 %
Water absorption rate
Saturation, 23°C
ISO 62
6.0E-3 %
Water absorption rate
Equilibrium, 23°C, 50% RH
ISO 62
3.0E-3 %
Electrical performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Surface resistivity
IEC 60093
> 1.0E+15 ohms
Volume resistivity
IEC 60093
1.0E+15 ohms·cm
Dielectric strength
IEC 60243-1
34 KV/mm
Relative permittivity
100 Hz
IEC 60250
3.50
Relative permittivity
1 MHz
IEC 60250
3.00
Dissipation factor
100 Hz
IEC 60250
0.020
Dissipation factor
1 MHz
IEC 60250
0.018
Arc resistance
Internal Method
135 sec
Compared to the anti leakage trace index
IEC 60112
PLC 3
hardness
شرایط آزمون
روش آزمون
نتیجه آزمون
Rockwell hardness
M -Sale
ISO 2039-2
80
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.