برگه داده فنی مقایسهoptical performance شرایط آزمون روش آزمون نتیجه آزمون turbidity 2540μm ASTM D1003 1.0 % transmissivity 2540μm ASTM D1003 88.0 % Refractive index ASTM D542 1.586
impact performance شرایط آزمون روش آزمون نتیجه آزمون Dart impact 23°C ASTM D3029 169 J Impact strength of cantilever beam gap ASTM D1822 546 kJ/m² Impact strength of cantilever beam gap 23°C ASTM D4812 3200 J/m Impact strength of cantilever beam gap 23°C ASTM D256 800 J/m
flammability شرایط آزمون روش آزمون نتیجه آزمون Extreme Oxygen Index ASTM D2863 25 % UL flame retardant rating 6.0mm UL 94 V-0 UL flame retardant rating 0.75mm UL 94 V-2
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون tensile strength Yield ASTM D638 62.1 Mpa tensile strength Break ASTM D638 65.5 Mpa bending strength Yield,50.0mmSpan ASTM D790 93.1 Mpa Taber abraser 1000Cycles,1000g,CS-17Wheel ASTM D1044 10.0 mg elongation Yield ASTM D638 7.0 % elongation Break ASTM D638 110 % Bending modulus 50.0mmSpan ASTM D790 2340 Mpa
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 0.45MPa,Unannealed,6.40mm ASTM D648 138 °C specific heat ASTMC351 1260 J/kg/°C Linear coefficient of thermal expansion MD:-40to95°C ASTME831 6.8E-05 cm/cm/°C Vicat softening temperature ASTM D15255 154 °C Hot deformation temperature 1.8MPa,Unannealed,6.40mm ASTM D648 132 °C thermal conductivity ASTMC177 0.27 W/m/K RTI Elec UL 746 130 °C RTI Str UL 746 130 °C RTI Imp UL 746 130 °C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Water absorption rate Equilibrium,100°C ASTM D570 0.58 % Outdoor applicability UL 746C f1 Water absorption rate Equilibrium,23°C ASTM D570 0.35 % Water absorption rate 24hr ASTM D570 0.15 % Shrinkage rate MD:3.20mm Internal Method 0.50-0.70 % melt mass-flow rate 300°C/1.2kg ASTM D1238 11 g/10min density ASTM D792 1.19 g/cm³ Specific volume ASTM D792 0.830 cm³/g density ASTM D792 1.20 g/cm³
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Hot wire ignition HWI UL 746 PLC 4 High voltage arc tracing rate HVTR UL 746 PLC 2 Compared to the anti leakage trace index CTI UL 746 PLC 2 High arc combustion index HAI UL 746 PLC 1 Dissipation factor 1MHz ASTM D150 0.010 Dissipation factor 60Hz ASTM D150 9E-04 Dissipation factor 50Hz ASTM D150 9E-04 Dielectric constant 1MHz ASTM D150 2.96 Dielectric constant 60Hz ASTM D150 3.17 Dielectric constant 50Hz ASTM D150 3.17 Dielectric strength 3.20mm,inAir ASTM D149 15 KV/mm Volume resistivity ASTM D257 >1.0E+17 ohms·cm
hardness شرایط آزمون روش آزمون نتیجه آزمون Rockwell hardness R-Sale ASTM D785 118 Rockwell hardness M-Sale ASTM D785 70
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.