Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
40 kJ/m²
Impact strength of simply supported beam without notch
-40°C
ISO 179/1eU
30 kJ/m²
Charpy Notched Impact Strength
23°C
ISO 179/1eA
9.0 kJ/m²
Charpy Notched Impact Strength
-40°C
ISO 179/1eA
8.0 kJ/m²
flammability
شرایط آزمون
روش آزمون
نتیجه آزمون
UL flame retardant rating
1.5mm
IEC 60695-11-10,-20
V-0
UL flame retardant rating
0.35mm
IEC 60695-11-10,-20
V-0
UL flame retardant rating
1.5mm
UL 94
V-0
UL flame retardant rating
0.35mm
UL 94
V-0
Extreme Oxygen Index
ISO 4589-2
33 %
FMVSS flammability
FMVSS302
DNI
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
bending strength
ISO 178
200 Mpa
Bending modulus
ISO 178
10500 Mpa
Tensile strain
Break
ISO 527-2
1.9 %
tensile strength
Break
ISO 527-2
130 Mpa
Tensile modulus
ISO 527-2
11300 Mpa
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
RTI Imp
0.75mm
UL 746
155 °C
RTI Imp
1.5mm
UL 746
155 °C
RTI Imp
0.40mm
UL 746
155 °C
Hot deformation temperature
0.45MPa,Unannealed
ISO 75-2/B
243 °C
RTI Imp
3.0mm
UL 746
155 °C
RTI Str
0.40mm
UL 746
155 °C
RTI Str
0.75mm
UL 746
155 °C
RTI Str
1.5mm
UL 746
155 °C
RTI Str
3.0mm
UL 746
155 °C
Hot deformation temperature
1.8MPa,Unannealed
ISO 75-2/A
220 °C
Melting temperature
ISO 11357-3
252 °C
Linear coefficient of thermal expansion
MD:--
ISO 11359-2
1.4E-05 cm/cm/°C
Linear coefficient of thermal expansion
MD:-40to23°C
ISO 11359-2
2E-05 cm/cm/°C
Linear coefficient of thermal expansion
TD:--
ISO 11359-2
9E-05 cm/cm/°C
Linear coefficient of thermal expansion
TD:-40to23°C
ISO 11359-2
7.3E-05 cm/cm/°C
RTI Elec
0.40mm
UL 746
155 °C
RTI Elec
0.75mm
UL 746
155 °C
RTI Elec
1.5mm
UL 746
155 °C
RTI Elec
3.0mm
UL 746
155 °C
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Shrinkage rate
MD
ISO 294-4
0.20 %
Shrinkage rate
TD
ISO 294-4
0.80 %
density
ISO 1183
1.68 g/cm³
Top out temperature
170 °C
Electrical performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Compared to the anti leakage trace index
IEC 60112
V
Compared to the anti leakage trace index
CTI
UL 746
PLC 2
Dissipation factor
1MHz
IEC 60250
0.013
Dissipation factor
100Hz
IEC 60250
0.031
Relative permittivity
1MHz
IEC 60250
3.70
Relative permittivity
100Hz
IEC 60250
4.10
Surface resistivity
IEC 60093
1E+14 ohms
Volume resistivity
IEC 60093
>1.0E+15 ohms·cm
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.