برگه داده فنی مقایسهimpact performance شرایط آزمون روش آزمون نتیجه آزمون Dart impact -30°C, Total Energy ASTM D3763 54.0 J Dart impact 23°C, Total Energy ASTM D3763 54.0 J
flammability شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating 1.2 mm UL 94 HB
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون Tensile modulus ASTM D638 2270 Mpa tensile strength Yield ASTM D638 57.0 Mpa elongation Yield ASTM D638 5.0 % elongation Break ASTM D638 100 % Bending modulus 50.0 mm Span ASTM D790 2340 Mpa bending strength Yield, 50.0 mm Span ASTM D790 88.0 Mpa
injection شرایط آزمون روش آزمون نتیجه آزمون drying temperature 100 to 110 °C drying time 3.0 to 4.0 hr Suggested maximum moisture content 0.020 % Suggested injection volume 30 to 80 % Hopper temperature 60 to 80 °C Temperature at the rear of the barrel 250 to 290 °C Temperature in the middle of the barrel 255 to 295 °C Temperature at the front of the material cylinder 260 to 300 °C Spray nozzle temperature 275 to 300 °C Processing (melt) temperature 275 to 300 °C Mold temperature 60 to 90 °C Back pressure 0.300 to 0.700 Mpa Screw speed 40 to 70 rpm Exhaust hole depth 0.038 to 0.076 mm
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 0.45 MPa, Unannealed, 3.20 mm ASTM D648 129 °C Hot deformation temperature 1.8 MPa, Unannealed, 3.20 mm ASTM D648 112 °C Vicat softening temperature ISO 306/B50 130 °C Linear coefficient of thermal expansion -40 to 40°C,Flow ASTM E831 7.2E-5 cm/cm/°C RTI Elec UL 746 105 °C RTI Imp UL 746 80.0 °C RTI UL 746 105 °C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون melt mass-flow rate 260°C/5.0 kg ASTM D1238 19 g/10 min Shrinkage rate 3.20 mm,Flow Internal Method 0.50 - 0.70 %
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Compared to the anti leakage trace index UL 746 PLC 2 High arc combustion index UL 746 PLC 1 Hot wire ignition UL 746 PLC 3
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.