Impact strength of simply supported beam without notch
23℃
ISO 179/1eU
205 KJ/m
Impact strength of simply supported beam without notch
-30℃
ISO 179/1eU
58 KJ/m
Charpy Notched Impact Strength
23℃
ISO 179/1eA
4.3 KJ/m
Charpy Notched Impact Strength
-30℃
ISO 179/1eA
4.3 KJ/m
Suspended wall beam without notch impact strength
23℃
ISO 180/1U
63 KJ/m
Impact strength of cantilever beam gap
23℃
ISO 180/1A
4.0 KJ/m
Rockwell hardness
ISO 2039-2
79 M
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Melting temperature
ISO 11357-1
225 °C
Glass transition temperature
ISO 11357-1
60 °C
Hot deformation temperature
1.8Mpa
ISO 75-1/-2
55 °C
Hot deformation temperature
0.45Mpa
ISO 75-1/-2
150 °C
Vicat softening temperature
ISO 306
190 °C
Linear coefficient of thermal expansion
ISO 11359-2
1.1 E-4/℃
UL flame retardant rating
UL 94
HB
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Melt Volume Flow Rate (MVR)
ISO 1133
44 CM
Shrinkage rate
ISO 294-4
1.8-2.0 %
Water absorption rate
23℃,Saturation
ISO 62
0.09 %
Extreme Oxygen Index
ISO 4589
22 %
density
ISO 1183
1310 kg/m
Electrical performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Volume resistivity
100Hz
IEC 60250
4.1
Volume resistivity
1MHz
IEC 60250
3.2
Dielectric dissipation factor
1MHz
IEC 60250
200 E-4
Volume resistivity
IEC 60093
>1E13 ohm.m
Surface resistivity
IEC 60093
>1E15 Ohm
Dielectric strength
IEC 60243-1
15 KV/mm
Compared to the Leakage Traceability Index (CTI)
IEC 60112
600
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.