برگه داده فنی مقایسهimpact performance شرایط آزمون روش آزمون نتیجه آزمون Suspended wall beam without notch impact strength 6.40 mm ASTM D256 250 J/m
flammability شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating 0.30 mm UL 94 V-0 Extreme Oxygen Index ISO 527-1 40 % Solder resistance Internal Method 300 °C
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون tensile strength ASTM D638 157 Mpa elongation Break ASTM D638 5.1 % Bending modulus 23°C ASTM D790 11800 Mpa bending strength 23°C ASTM D790 158 Mpa
injection شرایط آزمون روش آزمون نتیجه آزمون drying temperature 130 °C drying time 4.0 to 24 hr Temperature at the rear of the barrel 280 to 320 °C Temperature in the middle of the barrel 320 to 340 °C Temperature at the front of the material cylinder 340 to 360 °C Spray nozzle temperature 340 to 360 °C Processing (melt) temperature 350 °C Mold temperature 40 to 160 °C Injection pressure 80.0 to 160 Mpa Injection speed 中等偏快 Maintain pressure 20.0 to 40.0 Mpa Back pressure 1.00 to 5.00 Mpa Screw speed 50 to 100 rpm
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 1.8 MPa, Unannealed ASTM D648 269 °C Linear coefficient of thermal expansion Flow : 150°C Internal Method 2.0E-6 cm/cm/°C Linear coefficient of thermal expansion Across Flow : 150°C Internal Method 8.5E-5 cm/cm/°C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Shrinkage rate 横向Flow Internal Method 0.60 % Shrinkage rate Flow Internal Method 0.20 % Water absorption rate Saturation ASTM D570 0.020 %
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Volume resistivity ASTM D257 1.0E+15 ohms·cm Dielectric constant 1 MHz ASTM D150 3.80 Dielectric constant 1.00 GHz ASTM D150 3.50 Dissipation factor 1 MHz ASTM D150 0.026 Dissipation factor 1.00 GHz ASTM D150 4.0E-3 Arc resistance ASTM D495 124 sec Compared to the anti leakage trace index IEC 60112 V
hardness شرایط آزمون روش آزمون نتیجه آزمون Rockwell hardness R-Scale ASTM D785 106
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.