TPU Desmopan® 255（粉） COVESTRO GERMANY
197
- قیمت واحد:US$ ۵٬۴۳۵ /MT
- مشخصات بسته‌بندی:25 کیلوگرم / بسته
- جنس بسته‌بندی:کیسه کاغذی
- مقدار عرضه:54.5MT
- شرایط تحویل:FOB
- بندر بارگیری :China Main Port
- روش‌های پرداخت قابل قبول:T/T
- حمل‌ونقل:برای جزئیات حمل و نقل با تامین کننده مذاکره کنید
مرکز خدمات بازرگانی پلاستیک PLAS (ایران)
مرکز خدمات تجاری پلاستیک پلاس ایران
+98 9122******مشاهده
info********مشاهده
توضیحات مواد
- ویژگی‌های مواد:مقاوم در برابر پوشیدن｜ضد شیمیایی｜قدرت بالا
- زمینه‌های کاربرد:دنده｜زمینه خودرو｜قطعات مکانیکی｜لوازم ورزشی｜دوربین｜کاربردهای هیدرولیکی｜چرخ｜واشیر｜دنده｜مهر و موم
- رنگ:--
- درجه:--
برگه داده فنی
مقایسه
| physical property | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| Shrinkage rate | MD：2.54mm | ASTM D955 | 0.80 % |
| TD：2.54mm | ASTM D955 | 0.80 % | |
| TD:2.54mm | ISO 2577 | 0.80 % | |
| MD:2.54mm | ISO 2577 | 0.80 % |
| hardness | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 55 |
| 邵氏D | ISO 868 | 55 |
| flammability | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |
| Supplementary Information | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| CompressiveLoad | 50%Deflection | ASTM D575 | 40.6 Mpa |
| 10%Deflection | ASTM D575 | 7.41 Mpa | |
| 15%Deflection | ASTM D575 | 10.1 Mpa | |
| 15%Deflection | ASTM D575 | 10.1 Mpa | |
| 2%Deflection | ASTM D575 | 0.965 Mpa | |
| 20%Deflection | ASTM D575 | 12.7 Mpa | |
| 25%Deflection | ASTM D575 | 15.5 Mpa | |
| 5%Deflection | ASTM D575 | 3.90 Mpa |
| Mechanical properties | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ASTM D1044 | 50.0 mg |
| Flexural modulus | -30°C | ASTM D790 | 1210 Mpa |
| 23°C | ASTM D790 | 68.9 Mpa | |
| 70°C | ASTM D790 | 51.7 Mpa | |
| -30°C | ISO 178 | 1210 Mpa | |
| 23°C | ISO 178 | 68.9 Mpa | |
| 70°C | ISO 178 | 51.7 Mpa | |
| shear strength | ASTM D732 | 38.5 Mpa | |
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ISO 4649 | 50.0 mg |
| Impact resistance | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| Dart impact | -30°C,2.54mm,TotalEnergy | ASTM D3763 | 50.0 J |
| 23°C,2.54mm,TotalEnergy | ASTM D3763 | 57.8 J |
| elastomer | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| tensile strength | 50%应变 | ISO 37 | 12.4 Mpa |
| 50%应变 | ASTM D412 | 12.4 Mpa | |
| 100%应变 | ASTM D412 | 15.9 Mpa | |
| 100%应变 | ISO 37 | 15.9 Mpa | |
| 300%应变 | ASTM D412 | 32.4 Mpa | |
| 300%应变 | ISO 37 | 32.4 Mpa | |
| 屈服 | ASTM D412 | 63.4 Mpa | |
| 屈服 | ISO 37 | 63.4 Mpa | |
| elongation | 断裂 | ASTM D412 | 500 % |
| 断裂 | ISO 37 | 500 % | |
| tear strength | ASTM D624 | 158 kN/m | |
| ISO 34-1 | 160 kN/m | ||
| compression set | 23°C,22hr3 | ASTM D395B | 15 % |
| 23°C,22hr | ASTM D395B | 20 % | |
| 70°C,22hr3 | ASTM D395B | 35 % | |
| 70°C,22hr | ASTM D395B | 65 % | |
| 100°C,22hr3 | ASTM D395B | 50 % | |
| 100°C,22hr | ASTM D395B | 75 % | |
| 23°C,22hr3 | ISO 815 | 15 % | |
| 23°C,22hr | ISO 815 | 20 % | |
| 70°C,22hr3 | ISO 815 | 35 % | |
| 70°C,22hr | ISO 815 | 65 % | |
| 100°C,22hr | ISO 815 | 75 % | |
| 100°C,22hr3 | ISO 815 | 50 % | |
| Shore hardness | ASTM D2632 | 40 % |
| aging | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| Change rate of tensile strength in air | 300%Strain,100°C,168hr | ASTM D573 | -5.0 % |
| 100°C,336hr | ASTM D573 | 14 % | |
| 100%Strain,100°C,336hr | ASTM D573 | 13 % | |
| 300%Strain,100°C,336hr | ASTM D573 | -1.0 % | |
| 100°C,504hr | ASTM D573 | 14 % | |
| 100%Strain,100°C,504hr | ASTM D573 | 14 % | |
| 300%Strain,100°C,504hr | ASTM D573 | 1.0 % | |
| 125°C,70hr | ASTM D573 | -20 % | |
| 100%Strain,125°C,70hr | ASTM D573 | 7.0 % | |
| 300%Strain,125°C,70hr | ASTM D573 | -23 % | |
| 100°C,70hr | ASTM D573 | 3.0 % | |
| 100%Strain,100°C,70hr | ASTM D573 | 11 % | |
| 300%Strain,100°C,70hr | ASTM D573 | 1.0 % | |
| 100°C,168hr | ASTM D573 | 8.0 % | |
| 100%Strain,100°C,168hr | ASTM D573 | 4.0 % | |
| Change rate of hardness (Shore) in the air | ShoreD,100°C,504hr | ISO 216 | 0.0 |
| ShoreD,125°C,70hr | ISO 216 | 1.0 | |
| 支撐D,125°C,168hr | ISO 216 | 0.0 | |
| ShoreD,125°C,336hr | ISO 216 | -5.0 | |
| ShoreD,125°C,504hr | ISO 216 | -4.0 | |
| Change rate of tensile strength in air | 23°C,70hr,inReferenceFuelA(Isooctane) | ASTM D471 | 6.0 % |
| 100%Strain,23°C,70hr,inReferenceFuelA(Isooctane) | ASTM D471 | 2.0 % | |
| 100%Strain100°C,70hr | ISO 216 | 11 % | |
| 300%Strain100°C,70hr | ISO 216 | 1.0 % | |
| 100°C,168hr | ISO 216 | 8.0 % | |
| 100%Strain100°C,168hr | ISO 216 | 4.0 % | |
| 300%Strain100°C,168hr | ISO 216 | -5.0 % | |
| 100°C,336hr | ISO 216 | 14 % | |
| 100%Strain100°C,336hr | ISO 216 | 13 % | |
| 300%Strain100°C,336hr | ISO 216 | -1.0 % | |
| 100°C,504hr | ISO 216 | 14 % | |
| 100%Strain100°C,504hr | ISO 216 | 14 % | |
| 125°C,504hr | ISO 216 | -27 % | |
| 100%Strain125°C,504hr | ISO 216 | 4.0 % | |
| 300%Strain125°C,504hr | ISO 216 | -30 % | |
| Change rate of ultimate elongation in air | 100°C,70hr | ASTM D573 | -3.0 % |
| 100°C,168hr | ASTM D573 | 7.0 % | |
| 100°C,336hr | ASTM D573 | 14 % | |
| 100°C,504hr | ASTM D573 | 15 % | |
| 125°C,70hr | ASTM D573 | 28 % | |
| 125°C,168hr | ASTM D573 | 24 % | |
| 125°C,336hr | ASTM D573 | 35 % | |
| 125°C,504hr | ASTM D573 | 30 % | |
| Tensile stress change rate | 100°C,70hr，断裂 | ISO 216 | -3.0 % |
| 100°C,168hr，断裂 | ISO 216 | 7.0 % | |
| 100°C,336hr，断裂 | ISO 216 | 14 % | |
| 100°C,504hr，断裂 | ISO 216 | 15 % | |
| 125°C,70hr，断裂 | ISO 216 | 28 % | |
| 125°C,168hr，断裂 | ISO 216 | 24 % | |
| 125°C,336hr，断裂 | ISO 216 | 35 % | |
| 125°C,504hr，断裂 | ISO 216 | 30 % | |
| Change rate of hardness (Shore) in the air | ShoreD,100°C,70hr | ASTM D573 | -2.0 |
| Change rate of tensile strength in air | 125°C,168hr | ASTM D573 | -11 % |
| 100%Strain,125°C,168hr | ASTM D573 | -2.0 % | |
| 300%Strain,125°C,168hr | ASTM D573 | -15 % | |
| 125°C,336hr | ASTM D573 | -23 % | |
| 100%Strain,125°C,336hr | ASTM D573 | 8.0 % | |
| 300%Strain,125°C,336hr | ASTM D573 | -27 % | |
| 125°C,504hr | ASTM D573 | -27 % | |
| 100%Strain,125°C,504hr | ASTM D573 | 4.0 % | |
| 300%Strain,125°C,504hr | ASTM D573 | -30 % | |
| 100°C,70hr | ISO 216 | 3.0 % | |
| 300%Strain100°C,504hr | ISO 216 | 1.0 % | |
| 125°C,70hr | ISO 216 | -20 % | |
| 100%Strain125°C,70hr | ISO 216 | 7.0 % | |
| 300%Strain125°C,70hr | ISO 216 | -23 % | |
| 125°C,168hr | ISO 216 | -11 % | |
| 100%应变125°C,168hr | ISO 216 | -2.0 % | |
| 300%Strain125°C,168hr | ISO 216 | -15 % | |
| 125°C,336hr | ISO 216 | -23 % | |
| 100%Strain125°C,336hr | ISO 216 | 8.0 % | |
| 300%Strain125°C,336hr | ISO 216 | -27 % | |
| Change rate of hardness (Shore) in the air | ShoreD,100°C,168hr | ASTM D573 | -1.0 |
| ShoreD,100°C,336hr | ASTM D573 | 0.0 | |
| ShoreD,100°C,504hr | ASTM D573 | 0.0 | |
| ShoreD,125°C,70hr | ASTM D573 | 1.0 | |
| 支撐D,125°C,168hr | ASTM D573 | 0.0 | |
| ShoreD,125°C,336hr | ASTM D573 | -5.0 | |
| ShoreD,125°C,504hr | ASTM D573 | -4.0 | |
| ShoreD,100°C,70hr | ISO 216 | -2.0 | |
| ShoreD,100°C,168hr | ISO 216 | -1.0 | |
| ShoreD,100°C,336hr | ISO 216 | 0.0 | |
| Change rate of tensile strength in air | 300%Strain,23°C,70hr,inReferenceFuelA(Isooctane) | ASTM D471 | 5.0 % |
| 23°C,70hr,甲醇 | ASTM D471 | 1.0 % | |
| 100%Strain,23°C,70hr,inReferenceFuelC | ASTM D471 | -19 % | |
| 300%Strain,23°C,70hr,inReferenceFuelC | ASTM D471 | -22 % | |
| 23°C,168hr,inReferenceFuelA(Isooctane) | ASTM D471 | -3.0 % | |
| 100%Strain,23°C,168hr,inReferenceFuelA(Isooctane) | ASTM D471 | -2.0 % | |
| 300%Strain,23°C,168hr,inReferenceFuelA(Isooctane) | ASTM D471 | -11 % | |
| 23°C,168hr,甲醇 | ASTM D471 | -4.0 % | |
| 100%Strain,23°C,168hr,inReferenceFuelC | ASTM D471 | -27 % | |
| 300%Strain,23°C,168hr,inReferenceFuelC | ASTM D471 | -34 % | |
| 23°C,336hr,inReferenceFuelA(Isooctane) | ASTM D471 | 6.0 % | |
| 100%Strain,23°C,336hr,inReferenceFuelA(Isooctane) | ASTM D471 | 3.0 % | |
| 300%Strain,23°C,336hr,inReferenceFuelA(Isooctane) | ASTM D471 | -1.0 % | |
| 23°C,70hr,甲醇 | BTM 00117 | 1.0 % | |
| 100%Strain,23°C,70hr,inReferenceFuelC | BTM 00117 | -19 % | |
| 300%Strain,23°C,70hr,inReferenceFuelC | BTM 00117 | -22 % | |
| 23°C,168hr,inReferenceFuelA(Isooctane) | BTM 00117 | -3.0 % | |
| 100%Strain,23°C,168hr,inReferenceFuelA(Isooctane) | BTM 00117 | -2.0 % | |
| 300%Strain,23°C,168hr,inReferenceFuelA(Isooctane) | BTM 00117 | -11 % | |
| 23°C,168hr,甲醇 | BTM 00117 | -4.0 % | |
| 100%Strain,23°C,168hr,inReferenceFuelC | BTM 00117 | -27 % | |
| 300%Strain,23°C,168hr,inReferenceFuelC | BTM 00117 | -34 % | |
| 23°C,336hr,inReferenceFuelA(Isooctane) | BTM 00117 | 6.0 % | |
| 100%Strain,100°C,70hr,inASTM#1Oil | ASTM D471 | 12 % | |
| 300%Strain,100°C,70hr,inASTM#1Oil | ASTM D471 | 7.0 % | |
| 100°C,70hr,在ASTM#3油中 | ASTM D471 | 19 % | |
| 100%Strain,100°C,70hr,inASTM#3Oil | ASTM D471 | 16 % | |
| 300%Strain,100°C,70hr,inASTM#3Oil | ASTM D471 | 13 % | |
| 100°C,168hr,inASTM#1Oil | ASTM D471 | -4.0 % | |
| 100%Strain,100°C,168hr,inASTM#1Oil | ASTM D471 | 14 % | |
| 300%Strain,100°C,168hr,inASTM#1Oil | ASTM D471 | 2.0 % | |
| 100°C,336hr,inASTM#1Oil | ASTM D471 | -20 % | |
| 100%Strain,100°C,336hr,inASTM#1Oil | ASTM D471 | 14 % | |
| 300%Strain,100°C,336hr,inASTM#1Oil | ASTM D471 | -9.0 % | |
| 100°C,504hr,inASTM#1Oil | ASTM D471 | -29 % | |
| 100%Strain,100°C,504hr,inASTM#1Oil | ASTM D471 | 15 % | |
| 300%Strain,100°C,504hr,inASTM#1Oil | ASTM D471 | -14 % | |
| 100°C,504hr,inASTM#3Oil | ASTM D471 | -18 % | |
| 100%Strain,100°C,504hr,inASTM#3Oil | ASTM D471 | 2.0 % | |
| 300%Strain,100°C,504hr,inASTM#3Oil | ASTM D471 | -12 % | |
| 23°C,70hr,inReferenceFuelA(Isooctane) | BTM 00117 | 6.0 % | |
| 100%Strain,23°C,70hr,inReferenceFuelA(Isooctane) | BTM 00117 | 2.0 % | |
| 300%Strain,23°C,70hr,inReferenceFuelA(Isooctane) | BTM 00117 | 5.0 % | |
| 100%Strain,23°C,336hr,inReferenceFuelA(Isooctane) | BTM 00117 | 3.0 % | |
| 300%Strain,23°C,336hr,inReferenceFuelA(Isooctane) | BTM 00117 | -1.0 % | |
| 23°C,336hr,inReferenceFuelC | BTM 00117 | -10 % | |
| 100%Strain,23°C,336hr,inReferenceFuelC | BTM 00117 | -32 % | |
| 300%Strain,23°C,336hr,inReferenceFuelC | BTM 00117 | -35 % | |
| 23°C,504hr,inReferenceFuelA(Isooctane) | BTM 00117 | -1.0 % | |
| 100%Strain,23°C,504hr,inReferenceFuelA(Isooctane) | BTM 00117 | 5.0 % | |
| 300%Strain,23°C,504hr,inReferenceFuelA(Isooctane) | BTM 00117 | 3.0 % | |
| 23°C,504hr,inReferenceFuelC | BTM 00117 | -11 % | |
| 100%Strain,23°C,504hr,inReferenceFuelC | BTM 00117 | -27 % | |
| 300%Strain,23°C,504hr,inReferenceFuelC | BTM 00117 | -28 % | |
| 100°C,70hr,在ASTM#1油中 | BTM 00117 | 18 % | |
| 100%Strain,100°C,70hr,inASTM#1Oil | BTM 00117 | 12 % | |
| 300%Strain,100°C,70hr,inASTM#1Oil | BTM 00117 | 7.0 % | |
| 23°C,336hr,inReferenceFuelC | ASTM D471 | -10 % | |
| 100%Strain,23°C,336hr,inReferenceFuelC | ASTM D471 | -32 % | |
| 300%Strain,23°C,336hr,inReferenceFuelC | ASTM D471 | -35 % | |
| 23°C,504hr,inReferenceFuelA(Isooctane) | ASTM D471 | -1.0 % | |
| 100%Strain,23°C,504hr,inReferenceFuelA(Isooctane) | ASTM D471 | 5.0 % | |
| 300%Strain,23°C,504hr,inReferenceFuelA(Isooctane) | ASTM D471 | 3.0 % | |
| 23°C,504hr,inReferenceFuelC | ASTM D471 | -11 % | |
| 100%Strain,23°C,504hr,inReferenceFuelC | ASTM D471 | -27 % | |
| 300%Strain,23°C,504hr,inReferenceFuelC | ASTM D471 | -28 % | |
| 100°C,70hr,在ASTM#1油中 | ASTM D471 | 18 % | |
| 100°C,336hr,inASTM#1Oil | BTM 00117 | -20 % | |
| 100°C,70hr,在ASTM#3油中 | BTM 00117 | 19 % | |
| 100%Strain,100°C,70hr,inASTM#3Oil | BTM 00117 | 16 % | |
| 300%Strain,100°C,70hr,inASTM#3Oil | BTM 00117 | 13 % | |
| 100°C,168hr,inASTM#1Oil | BTM 00117 | -4.0 % | |
| 100%Strain,100°C,168hr,inASTM#1Oil | BTM 00117 | 14 % | |
| 300%Strain,100°C,168hr,inASTM#1Oil | BTM 00117 | 2.0 % | |
| Tensile stress change rate | 100°C,70hr,在ASTM#1油中，断裂 | BTM 00117 | 8.0 % |
| 100°C,70hr,在ASTM#3油中，断裂 | BTM 00117 | 6.0 % | |
| 100°C,168hr,inASTM#1Oil，断裂 | BTM 00117 | 12 % | |
| 100°C,336hr,inASTM#1Oil，断裂 | BTM 00117 | 24 % | |
| 100°C,504hr,inASTM#1Oil，断裂 | BTM 00117 | 16 % | |
| 100°C,504hr,inASTM#3Oil，断裂 | BTM 00117 | 20 % | |
| Change rate of hardness (Shore) in the air | ShoreD,23°C,70hr,inReferenceFuelA(Isooctane) | ASTM D471 | -4.0 |
| ShoreD,23°C,70hr,inReferenceFuelC | ASTM D471 | -7.0 | |
| ShoreD,23°C,168hr,inReferenceFuelA(Isooctane) | ASTM D471 | 1.0 | |
| ShoreD,23°C,168hr,inReferenceFuelC | ASTM D471 | -4.0 | |
| Shore hardness | ShoreD,23°C,70hr,inReferenceFuelA(Isooctane) | BTM 00117 | -4.0 |
| ShoreD,23°C,70hr,inReferenceFuelC | BTM 00117 | -7.0 | |
| ShoreD,23°C,168hr,inReferenceFuelA(Isooctane) | BTM 00117 | 1.0 | |
| ShoreD,23°C,168hr,inReferenceFuelC | BTM 00117 | -4.0 | |
| ShoreD,23°C,336hr,inReferenceFuelA(Isooctane) | BTM 00117 | -1.0 | |
| ShoreD,23°C,336hr,inReferenceFuelC | BTM 00117 | -6.0 | |
| ShoreD,23°C,504hr,inReferenceFuelA(Isooctane) | BTM 00117 | 6.0 | |
| ShoreD,23°C,504hr,inReferenceFuelC | BTM 00117 | -8.0 | |
| ShoreD,100°C,70hr,inASTM#1Oil | BTM 00117 | 2.0 | |
| ShoreD,100°C,70hr,inASTM#3Oil | BTM 00117 | 2.0 | |
| Change rate of ultimate elongation in air | 100°C,504hr,inASTM#1Oil | ASTM D471 | 16 % |
| 100°C,504hr,inASTM#3Oil | ASTM D471 | 20 % | |
| Tensile stress change rate | 23°C,70hr,inReferenceFuelA(Isooctane)，断裂 | BTM 00117 | -4.0 % |
| 23°C,70hr,甲醇，断裂 | BTM 00117 | 5.0 % | |
| 23°C,168hr,inReferenceFuelA(Isooctane)，断裂 | BTM 00117 | 9.0 % | |
| 23°C,168hr,甲醇，断裂 | BTM 00117 | 6.0 % | |
| 23°C,336hr,inReferenceFuelA(Isooctane)，断裂 | BTM 00117 | -4.0 % | |
| 23°C,336hr,inReferenceFuelC，断裂 | BTM 00117 | -2.0 % | |
| 23°C,504hr,inReferenceFuelA(Isooctane)，断裂 | BTM 00117 | -2.0 % | |
| 23°C,504hr,inReferenceFuelC，断裂 | BTM 00117 | -8.0 % | |
| Change rate of tensile strength in air | 100%Strain,100°C,336hr,inASTM#1Oil | BTM 00117 | 14 % |
| 300%Strain,100°C,336hr,inASTM#1Oil | BTM 00117 | -9.0 % | |
| 100°C,504hr,inASTM#1Oil | BTM 00117 | -29 % | |
| 100%Strain,100°C,504hr,inASTM#1Oil | BTM 00117 | 15 % | |
| 300%Strain,100°C,504hr,inASTM#1Oil | BTM 00117 | -14 % | |
| 100°C,504hr,inASTM#3Oil | BTM 00117 | -18 % | |
| 100%Strain,100°C,504hr,inASTM#3Oil | BTM 00117 | 2.0 % | |
| 300%Strain,100°C,504hr,inASTM#3Oil | BTM 00117 | -12 % | |
| Change rate of ultimate elongation in air | 23°C,70hr,inReferenceFuelA(Isooctane) | ASTM D471 | -4.0 % |
| 23°C,70hr,甲醇 | ASTM D471 | 5.0 % | |
| 23°C,168hr,inReferenceFuelA(Isooctane) | ASTM D471 | 9.0 % | |
| 23°C,168hr,甲醇 | ASTM D471 | 6.0 % | |
| 23°C,336hr,inReferenceFuelA(Isooctane) | ASTM D471 | -4.0 % | |
| 23°C,336hr,inReferenceFuelC | ASTM D471 | -2.0 % | |
| 23°C,504hr,inReferenceFuelA(Isooctane) | ASTM D471 | -2.0 % | |
| 23°C,504hr,inReferenceFuelC | ASTM D471 | -8.0 % | |
| 100°C,70hr,在ASTM#1油中 | ASTM D471 | 8.0 % | |
| 100°C,70hr,在ASTM#3油中 | ASTM D471 | 6.0 % | |
| 100°C,168hr,inASTM#1Oil | ASTM D471 | 12 % | |
| 100°C,336hr,inASTM#1Oil | ASTM D471 | 24 % | |
| Change rate of hardness (Shore) in the air | ShoreD,23°C,336hr,inReferenceFuelA(Isooctane) | ASTM D471 | -1.0 |
| ShoreD,23°C,336hr,inReferenceFuelC | ASTM D471 | -6.0 | |
| ShoreD,23°C,504hr,inReferenceFuelA(Isooctane) | ASTM D471 | 6.0 | |
| ShoreD,23°C,504hr,inReferenceFuelC | ASTM D471 | -8.0 | |
| ShoreD,100°C,70hr,inASTM#1Oil | ASTM D471 | 2.0 | |
| ShoreD,100°C,70hr,inASTM#3Oil | ASTM D471 | 2.0 | |
| ShoreD,100°C,168hr,inASTM#1Oil | ASTM D471 | 1.0 | |
| ShoreD,100°C,336hr,inASTM#1Oil | ASTM D471 | -2.0 | |
| ShoreD,100°C,504hr,inASTM#1Oil | ASTM D471 | 0.0 | |
| ShoreD,100°C,504hr,inASTM#3Oil | ASTM D471 | -1.0 | |
| volume change | 23°C,168hr,inReferenceFuelA | BTM 00117 | 0.0 % |
| 23°C,168hr,甲醇 | BTM 00117 | 10 % | |
| 23°C,336hr,inReferenceFuelA | BTM 00117 | 0.0 % | |
| 23°C,336hr,inReferenceFuelC | BTM 00117 | 14 % | |
| 23°C,504hr,inReferenceFuelA | BTM 00117 | 0.0 % | |
| 23°C,504hr,inReferenceFuelC | BTM 00117 | 14 % | |
| 100°C,70hr,在ASTM#1油中 | BTM 00117 | -1.0 % | |
| 100°C,70hr,在ASTM#3油中 | BTM 00117 | 2.0 % | |
| 100°C,168hr,inASTM#1Oil | BTM 00117 | 0.0 % | |
| 100°C,336hr,inASTM#1Oil | BTM 00117 | -1.0 % | |
| 23°C,504hr,inReferenceFuelA | ASTM D471 | 0.0 % | |
| 23°C,504hr,inReferenceFuelC | ASTM D471 | 14 % | |
| 100°C,70hr,在ASTM#1油中 | ASTM D471 | -1.0 % | |
| 100°C,70hr,在ASTM#3油中 | ASTM D471 | 2.0 % | |
| 100°C,168hr,inASTM#1Oil | ASTM D471 | 0.0 % | |
| 100°C,336hr,inASTM#1Oil | ASTM D471 | -1.0 % | |
| 100°C,504hr,inASTM#1Oil | ASTM D471 | -1.0 % | |
| 100°C,504hr,inASTM#3Oil | ASTM D471 | 4.0 % | |
| 23°C,70hr,inReferenceFuelA | BTM 00117 | 0.0 % | |
| 23°C,70hr,甲醇 | BTM 00117 | 6.0 % | |
| Shore hardness | ShoreD,100°C,168hr,inASTM#1Oil | BTM 00117 | 1.0 |
| ShoreD,100°C,336hr,inASTM#1Oil | BTM 00117 | -2.0 | |
| ShoreD,100°C,504hr,inASTM#1Oil | BTM 00117 | 0.0 | |
| ShoreD,100°C,504hr,inASTM#3Oil | BTM 00117 | -1.0 | |
| volume change | 23°C,70hr,inReferenceFuelA | ASTM D471 | 0.0 % |
| 23°C,70hr,甲醇 | ASTM D471 | 6.0 % | |
| 23°C,168hr,inReferenceFuelA | ASTM D471 | 0.0 % | |
| 23°C,168hr,甲醇 | ASTM D471 | 10 % | |
| 23°C,336hr,inReferenceFuelA | ASTM D471 | 0.0 % | |
| 23°C,336hr,inReferenceFuelC | ASTM D471 | 14 % | |
| 100°C,504hr,inASTM#1Oil | BTM 00117 | -1.0 % | |
| 100°C,504hr,inASTM#3Oil | BTM 00117 | 4.0 % |
| Thermal performance | شرایط آزمون | روش آزمون | نتیجه آزمون |
|---|---|---|---|
| brittle temperature | ISO 974 | <-68.0 °C | |
| Glass Transition Temperature | DMA | -26.0 °C | |
| vicat | ASTM D15255 | 168 °C | |
| ISO 306/50 | 168 °C | ||
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.3E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ASTM D648 | 59.0 °C |
| 0.45MPa,未退火，HDT | ISO 75-2/B | 59.0 °C | |
| brittle temperature | ASTM D746 | <-68.0 °C |
نکات مهم: Plas.com داده‌های برگه فنی را از تولیدکنندگان مواد جمع‌آوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت داده‌ها انجام می‌دهد، اما هیچ مسئولیتی در قبال داده‌ها ندارد. اکیداً توصیه می‌شود که صحت داده‌ها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.
تماس با ما
دریافت اپلیکیشن
Top