Impact strength of simply supported beam without notch
23°C
ISO 179/1eU
85 kJ/m²
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Tensile strain
Break, 23°C
ISO 527-2
3.0 %
tensile strength
Break, 23°C
ISO 527-2/1A
200 Mpa
Tensile modulus
23°C
ISO 527-2/1A
11300 Mpa
injection
شرایط آزمون
روش آزمون
نتیجه آزمون
Mold temperature
70 to 100 °C
Temperature at the front of the material cylinder
280 to 290 °C
Temperature in the middle of the barrel
275 to 285 °C
Temperature at the rear of the barrel
270 to 280 °C
Suggested maximum moisture content
0.20 %
drying temperature
80 °C
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Melting temperature
ISO 11357-3
262 °C
Hot deformation temperature
1.8 MPa, Unannealed
ISO 75-2/Af
250 °C
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Shrinkage rate
横向Flow
ISO 294-4
1.1 %
Shrinkage rate
Flow
ISO 294-4
0.40 %
Water absorption rate
24 hr, 23°C
ISO 62
0.78 %
Water absorption rate
Equilibrium, 23°C, 50% RH
ISO 62
1.6 %
Water absorption rate
Saturation, 23°C
ISO 62
5.5 %
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.