ویژگیهای مواد:مقاوم در برابر گرما|قدرت بالا|تقویت فیبر شیشه ای
زمینههای کاربرد:کاربردهای خودرو
رنگ:--
درجه:مدل زدایی
برگه داده فنی
mechanical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Tensile modulus
ISO 527-2/1
7200 Mpa
tensile strength
Break
ISO 527-2/5
104 Mpa
Tensile strain
Yield
ISO 527-2/5
2.3 %
Bending modulus
ISO 178
5500 Mpa
bending strength
ISO 178
122 Mpa
injection
شرایط آزمون
روش آزمون
نتیجه آزمون
drying temperature
80 °C
drying time
4.0 hr
Temperature at the rear of the barrel
175 to 190 °C
Temperature in the middle of the barrel
195 to 205 °C
Temperature at the front of the material cylinder
210 to 220 °C
Processing (melt) temperature
200 to 215 °C
Mold temperature
80 to 110 °C
Back pressure
0.200 to 0.300 Mpa
Screw speed
30 to 60 rpm
thermal performance
شرایط آزمون
روش آزمون
نتیجه آزمون
Hot deformation temperature
1.8 MPa, Unannealed, 4.00 mm, 64.0 mm Span
ISO 75-2/Af
157 °C
Linear coefficient of thermal expansion
Flow : 23 to 60°C
ISO 11359-2
6.3E-5 cm/cm/°C
Linear coefficient of thermal expansion
Across Flow : 23 to 60°C
ISO 11359-2
1.1E-4 cm/cm/°C
Physical properties
شرایط آزمون
روش آزمون
نتیجه آزمون
Shrinkage rate
Flow
Internal Method
0.50 %
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.