برگه داده فنی مقایسهflammability شرایط آزمون روش آزمون نتیجه آزمون UL flame retardant rating 0.75 mm UL 94 HB UL flame retardant rating 1.5 mm UL 94 HB UL flame retardant rating 3.0 mm UL 94 HB
mechanical properties شرایط آزمون روش آزمون نتیجه آزمون tensile strength Break, 23°C, 3.20 mm, Injection ASTM D638 123 Mpa elongation Break, 23°C, 3.20 mm, Injection ASTM D638 4.0 % Bending modulus 23°C, 3.20 mm, Injection ASTM D790 4900 Mpa bending strength 23°C, 3.20 mm, Injection ASTM D790 167 Mpa
injection شرایط آزمون روش آزمون نتیجه آزمون drying temperature 80 to 100 °C drying time 4.0 to 5.0 hr Temperature at the rear of the barrel 265 to 275 °C Temperature in the middle of the barrel 270 to 280 °C Temperature at the front of the material cylinder 270 to 285 °C Spray nozzle temperature 270 to 280 °C Processing (melt) temperature 270 to 290 °C Mold temperature 80 to 110 °C Back pressure 29.4 to 58.8 Mpa Screw speed 30 to 60 rpm
thermal performance شرایط آزمون روش آزمون نتیجه آزمون Hot deformation temperature 0.45 MPa, Unannealed, 6.40 mm, Injection ASTM D648 255 °C Hot deformation temperature 1.8 MPa, Unannealed, 6.40 mm, Injection ASTM D648 240 °C Melting temperature ASTM D3418 260 °C Linear coefficient of thermal expansion Flow ASTM D696 4.0E-5 cm/cm/°C RTI Elec 0.75 mm UL 746 120 °C RTI Elec 1.5 mm UL 746 110 °C RTI Elec 3.0 mm UL 746 120 °C RTI Imp 0.75 mm UL 746 120 °C RTI Imp 1.5 mm UL 746 110 °C RTI Imp 3.0 mm UL 746 120 °C RTI 0.75 mm UL 746 120 °C RTI 1.5 mm UL 746 110 °C RTI 3.0 mm UL 746 120 °C
Physical properties شرایط آزمون روش آزمون نتیجه آزمون Shrinkage rate 23°C, 3.20 mm, Injection,Flow ASTM D955 0.70 - 1.2 % Water absorption rate 24 hr, 23°C ASTM D570 1.0 %
Electrical performance شرایط آزمون روش آزمون نتیجه آزمون Volume resistivity 23°C ASTM D257 1.0E+16 ohms·cm Dielectric strength 23°C, 1.00 mm ASTM D149 25 KV/mm Dielectric constant 23°C, 1 MHz ASTM D150 4.00
hardness شرایط آزمون روش آزمون نتیجه آزمون Rockwell hardness R-Scale, 23°C, Injection ASTM D785 121
نکات مهم: Plas.com دادههای برگه فنی را از تولیدکنندگان مواد جمعآوری کرده است. Plas.com تمام تلاش خود را برای افزایش دقت دادهها انجام میدهد، اما هیچ مسئولیتی در قبال دادهها ندارد. اکیداً توصیه میشود که صحت دادهها را با تولیدکنندگان مواد تأیید کنید پیش از آنکه تصمیم نهایی بگیرید.