Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Advance | | | 15 | % |
Density / Specific Gravity | | | 1.53 | |
Moisture Absorption | | | 0.07 | % |
Modeling Shrinkage | | | 4-6 | E-3 |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | | | 5030 | Mpa |
Tensile Strength (Break) | | | 93 | Mpa |
Notched Impact Strength | 23℃ | | 53 | J/m |
Continuous Use Temperature | 电气 | | 120 | °C |
Continuous Use Temperature | 含冲击 | | 120 | °C |
Continuous Use Temperature | 无冲击 | | 140 | °C |
Rockwell Hardness (R-Scale) | | | 118 | |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | | 5V | |
Flame Rating | | | V-0 | |
Heat Deflection Temperature | | | 210 | °C |
Coefficient of Linear Thermal Expansion | | | 2E-05 | 1/℃ |
Flame Rating | | | 3 | mm |
Heat Deflection Temperature | | | 182 | °C |
Electrical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | | 4E+16 | ohm-cm |
Dielectric Constant | | | 3.4 | |
Dissipation Factor | | | 0.02 | |
Other Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | | | 0.9 | mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.