plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM CH-10 JAPAN POLYPLASTIC
DURACON®
Automotive sector
Carbon fiber reinforced,Conductive,Filler: Carbon fiber rein,10% filler by weight
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
Rockwell hardnessM-ScaleISO 2039-295
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
ColourNumberCD3501
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A163 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method2E-05 cm/cm/°C
TD:23to55°CInternal Method9E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
Bending modulusISO 1787500 Mpa
bending strengthISO 178170 Mpa
Friction coefficientDynamic2JISK72180.37
Steel - Dynamic3JISK72180.28
Tensile modulusISO 527-28800 Mpa
Tensile strainBreakISO 527-22.0 %
tensile strengthISO 527-2116 Mpa
Wear factor0.060MPa,0.15m/sec5JISK7218200 10^-8mm³/N·m
0.49MPa,0.30m/sec4JISK721810 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK721810000 10^-8mm³/N·m
0.49MPa,0.30m/sec6JISK7218500 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
Surface resistivityIEC 600935E+03 ohms
Volume resistivityIEC 600932E+04 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
densityISO 11831.44 g/cm³
melt mass-flow rate190°C/2.16kgISO 11334.0 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11333.30 cm3/10min
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
Charpy Notched Impact Strength23°CISO 179/1eA3.0 kJ/m²
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/CH-10
UL flame retardant ratingUL 94HB