plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PA46 TE250F9 DSM HOLAND

Stanyl®

Automotive Applications,Electronic and electrical components

Thermal stability,Flame retardant,Glass fiber reinforced

UL

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	DSM HOLAND/TE250F9
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	290 °C
Hot deformation temperature		1.8 MPa, Unannealed	ISO 75-2/A	290 °C
Linear coefficient of thermal expansion	Across Flow	ISO 11359-2	4.5E-5 cm/cm/°C
Linear coefficient of thermal expansion		Flow	ISO 11359-2	2.0E-5 cm/cm/°C
Melting temperature		ISO 11357-3	295 °C
RTI Elec	0.75 mm	UL 746	140 °C
Thermal Index - 5000 hr		IEC 60216	163 °C

mechanical properties	Test Condition	Test Method	DSM HOLAND/TE250F9
Bending modulus	--	ISO 178	15000 Mpa
		120°C	ISO 178	10500 Mpa
		160°C	ISO 178	9000 Mpa
Tensile modulus	120°C	ISO 527-2	11000 Mpa
		--	ISO 527-2	17000 Mpa
		160°C	ISO 527-2	10000 Mpa
Tensile strain	Break	ISO 527-2	2.0 %
		Break, 160°C	ISO 527-2	3.0 %
		Break, 120°C	ISO 527-2	3.0 %
tensile strength	Break, 120°C	ISO 527-2	130 Mpa
		Break	ISO 527-2	200 Mpa
		Break, 160°C	ISO 527-2	120 Mpa

Electrical performance	Test Condition	Test Method	DSM HOLAND/TE250F9
Compared to the anti leakage trace index		IEC 60112	PLC 2
Dielectric strength		IEC 60243-1	30 KV/mm
Relative permittivity	100 Hz	IEC 60250	4.30
Relative permittivity		1 MHz	IEC 60250	4.00
Volume resistivity		IEC 60093	1.0E+15 ohms·cm

Physical properties	Test Condition	Test Method	DSM HOLAND/TE250F9
density		ISO 1183	1.82 g/cm³
Shrinkage rate	横向Flow	ISO 294-4	0.90 %
Shrinkage rate		Flow	ISO 294-4	0.30 %
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.3 %

impact performance	Test Condition	Test Method	DSM HOLAND/TE250F9
Charpy Notched Impact Strength	23°C	ISO 179/1eA	13 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	13 kJ/m²
Impact strength of cantilever beam gap	-40°C	ISO 180/1A	13 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	13 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	50 kJ/m²
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	65 kJ/m²

flammability	Test Condition	Test Method	DSM HOLAND/TE250F9
Flammability level		UL 94	V-0

Contact Us

Get App

Top