plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PPS OFL-4036 SABIC INNOVATIVE US

LNP™ THERMOCOMP™

Electronic and electrical components

Flame retardant,High heat resistance,Filler: Glass fiber reinf,30% filler by weight

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE US/OFL-4036
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	264 °C
		0.45MPa,Unannealed,64.0mmSpan	ISO 75-2/Bf	278 °C
		1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	257 °C
		0.45MPa,Unannealed,3.20mm	ASTM D648	278 °C
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	2.3E-5to5.0E-5 cm/cm/°C
		TD：-40to40°C	ISO 11359-2	5E-05 cm/cm/°C
		TD：-40to40°C	ASTME831	4.9E-05 cm/cm/°C
		TD：-30to30°C	ASTM D696	3.4E-05 cm/cm/°C
		MD：-30to30°C	ASTM D696	2.5E-05 cm/cm/°C
		MD：-40to40°C	ISO 11359-2	2.4E-05 cm/cm/°C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE US/OFL-4036
Bending modulus	50.0mmSpan	ASTM D790	11600 Mpa
Bending modulus			ISO 178	11100 Mpa
bending strength		ISO 178	180 Mpa
bending strength		Break,50.0mmSpan	ASTM D790	178 Mpa
elongation	Break	ASTM D638	1.3 %
Friction coefficient	Dynamic	ASTM D3702Modified	0.44
Friction coefficient		Static	ASTM D3702Modified	0.35
Tensile modulus		ASTM D638	12800 Mpa
Tensile modulus			ISO 527-2/1	12000 Mpa
Tensile strain	Break	ISO 527-2/5	1.3 %
tensile strength	Break	ISO 527-2/5	121 Mpa
tensile strength		Break	ASTM D638	124 Mpa
Wear factor	Ring	ASTM D3702Modified	7.00to8.00 10^-10in^5-min/ft-lb-hr
Wear factor		Washer	ASTM D3702Modified	52.5 10^-10in^5-min/ft-lb-hr

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE US/OFL-4036
Shrinkage rate	TD：24hr	ASTM D955	0.60-0.80 %
		TD:24hr	ISO 294-4	0.30-0.48 %
		MD：24hr	ASTM D955	0.10-0.20 %
		MD:24hr	ISO 294-4	0.13-0.18 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.010 %
Water absorption rate		24hr,50%RH	ASTM D570	1.2E-03 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE US/OFL-4036
Dart impact	23°C,EnergyatPeakLoad	ASTM D3763	3.40 J
Dart impact		23°C,TotalEnergy	ASTM D3763	11.8 J
Impact strength of cantilever beam gap	23°C	ISO 180/1A	5.7 kJ/m²
Multi axis Instrumented Impact Energy		ISO 6603-2	2.30 J
Suspended wall beam without notch impact strength	23°C	ISO 180/1U	25 kJ/m²

Contact Us

Get App

Top