Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO SE1GFN3 SABIC INNOVATIVE US
NORYL™
medical care
Glass fiber reinforced
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| Rockwell hardness | L-Sale | ASTM D785 | 108 |
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 135 °C |
| 0.45MPa,Unannealed,6.40mm | ASTM D648 | 141 °C | |
| Linear coefficient of thermal expansion | MD:-40to95°C | ASTME831 | 2.5E-05 cm/cm/°C |
| RTI Elec | UL 746 | 110 °C | |
| RTI Imp | UL 746 | 105 °C | |
| RTI Str | UL 746 | 110 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| Bending modulus | 100mmSpan | ASTM D790 | 7790 Mpa |
| bending strength | Yield,100mmSpan | ASTM D790 | 172 Mpa |
| elongation | Break | ASTM D638 | 5.0 % |
| tensile strength | Break | ASTM D638 | 121 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| Arc resistance | ASTM D495 | PLC6 | |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 |
| Dielectric constant | 50Hz | ASTM D150 | 3.15 |
| 60Hz | ASTM D150 | 3.15 | |
| Dielectric strength | 3.20mm,inOil | ASTM D149 | 21 KV/mm |
| Dissipation factor | 60Hz | ASTM D150 | 2E-03 |
| 50Hz | ASTM D150 | 2E-03 | |
| High arc combustion index | HAI | UL 746 | PLC 2 |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 4 |
| Hot wire ignition | HWI | UL 746 | PLC 0 |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| density | ASTM D792 | 1.31 g/cm³ | |
| Shrinkage rate | MD:3.20mm | Internal Method | 0.10-0.40 % |
| Water absorption rate | 24hr | ASTM D570 | 0.060 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 120 J/m |
| -40°C | ASTM D256 | 96 J/m |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/SE1GFN3 |
|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | 36 % | |
| UL flame retardant rating | 6.0mm | UL 94 | V-0 |
| 1.5mm | UL 94 | V-1 |