plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM GH-25D CD3501 JAPAN POLYPLASTIC
DURACON®
Automotive Applications,Fitness equipment
High impact resistance,High mobility,Filler: Glass fiber reinf,25% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
Rockwell hardnessM-ScaleISO 2039-295
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
ColourNumberCF3500/CD3501
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A162 °C
Linear coefficient of thermal expansionMD：23to55°CInternal Method3E-05 cm/cm/°C
TD：23to55°CInternal Method9E-05 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
Bending modulusISO 1787900 Mpa
bending strengthISO 178196 Mpa
Friction coefficientDynamic2JISK72180.37
Steel - Dynamic3JISK72180.60
Tensile modulusISO 527-28500 Mpa
Tensile strainBreakISO 527-22.4 %
tensile strengthISO 527-2136 Mpa
Wear factor0.060MPa,0.15m/sec4JISK7218300 10^-8mm³/N·m
0.49MPa,0.30m/sec5JISK7218400 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK721810000 10^-8mm³/N·m
0.49MPa,0.30m/sec6JISK72187000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
Dielectric strength3.00mmIEC 60243-124 KV/mm
Surface resistivityIEC 600934E+16 ohms
Volume resistivityIEC 600935E+13 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
melt mass-flow rate190°C/2.16kgISO 113312 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11339.00 cm3/10min
Water absorption rate23°C,24hrISO 620.60 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/GH-25D CD3501
UL flame retardant ratingUL 94HB

Contact Us

Get App

Top