plas

Log In | Sign Up

Categories

Plastic Raw Materials

Modified Plastics

Plastic Additives

Color Masterbatch

Plastic Datasheets

Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC EXL1112-WH9G581 SABIC INNOVATIVE US

LEXAN™

Fitness equipment,Bottle cap,Electronic field,Electrical field

Easy to process,High mobility,copolymer

--

--

--

--

--

--

--

--

--

--

--

--

--

--

--

Plastic Datasheets

hardness	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
Rockwell hardness	L-Sale	ISO 2039-2	89

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	122 °C
Hot deformation temperature		1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	117 °C
Linear coefficient of thermal expansion	TD：23to80°C	ISO 11359-2	7.6E-05 cm/cm/°C
		MD：-40to95°C	ASTME831	7.5E-05 cm/cm/°C
		MD：23to80°C	ISO 11359-2	7.5E-05 cm/cm/°C
		TD：-40to95°C	ASTME831	7.6E-05 cm/cm/°C
RTI Elec		UL 746	130 °C
RTI Str		UL 746	130 °C
Vicat softening temperature	--	ISO 306/B120	140 °C
			ASTM D152510	139 °C
		--	ISO 306/B50	139 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
Bending modulus	50.0mmSpan	ASTM D790	2250 Mpa
Bending modulus			ISO 178	2150 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	94.8 Mpa
bending strength			ISO 178	89.5 Mpa
elongation	Break	ASTM D638	120 %
elongation		Yield	ASTM D638	5.7 %
Tensile modulus		ASTM D638	2260 Mpa
Tensile modulus			ISO 527-2/1	2340 Mpa
Tensile strain	Break	ISO 527-2/50	120 %
Tensile strain		Yield	ISO 527-2/50	5.4 %
tensile strength	Yield	ASTM D638	58.6 Mpa
		Yield	ISO 527-2/50	57.8 Mpa
		Break	ISO 527-2/50	56.8 Mpa
		Break	ASTM D638	57.1 Mpa

Electrical performance	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
Surface resistivity		ASTM D257	>1.0E+15 ohms
Volume resistivity		ASTM D257	>1.0E+15 ohms·cm

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
melt mass-flow rate	300°C/1.2kg	ASTM D1238	20 g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	19.0 cm3/10min
Shrinkage rate	TD：3.20mm	Internal Method	0.40-0.80 %
Shrinkage rate		MD：3.20mm	Internal Method	0.40-0.80 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.090 %
Water absorption rate		Saturation,23°C	ISO 62	0.12 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
Charpy Notched Impact Strength	23°C	ISO 179/1eA	65 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	45 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	74.9 J
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	55 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	65 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	NoBreak
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	NoBreak
Suspended wall beam without notch impact strength		23°C	ISO 180/1U	NoBreak

flammability	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
Burning wire flammability index	3.0mm	IEC 60695-2-12	960 °C
Hot filament ignition temperature	3.0mm	IEC 60695-2-13	850 °C
Hot filament ignition temperature		0.8mm	IEC 60695-2-13	850 °C
UL flame retardant rating	1.5mm	UL 94	HB

optical performance	Test Condition	Test Method	SABIC INNOVATIVE US/EXL1112-WH9G581
transmissivity	2540μm	ASTM D1003	82.0 %
turbidity	2540μm	ASTM D1003	3.0 %

Contact Us

Get App

Top