Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

PC FXE1414 WH9D279 SABIC INNOVATIVE NANSHA

LEXAN™

Electrical appliances,Electronic field,Electrical field,Household appliances

Low temperature resistanc,transparent,Flame retardant

Plastic Datasheets

thermal performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414 WH9D279
Hot deformation temperature	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	139 °C
		1.8 MPa, Unannealed, 3.20 mm	ASTM D648	124 °C
		1.8MPa,Unannealed,3.20mm	ASTM D648	124 °C
		0.45MPa,Unannealed,3.20mm	ASTM D648	139 °C
		1.8MPa,Unannealed,100mmSpan	ISO 75-2/Ae	128 °C
		1.8 MPa, Unannealed, 4.00 mm, 100 mm Span9	ISO 75-2/Ae	128 °C
Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	7.2E-5 cm/cm/°C
		Flow : -40 to 40°C	ASTM E831	7.0E-5 cm/cm/°C
		MD：-40to40°C	ASTME831	7E-05 cm/cm/°C
		TD：-40to40°C	ASTME831	7.5E-05 cm/cm/°C
		TD：23to80°C	ISO 11359-2	7.2E-05 cm/cm/°C
		Across Flow : -40 to 40°C	ASTM E831	7.5E-5 cm/cm/°C
		MD：23to80°C	ISO 11359-2	7.2E-05 cm/cm/°C
		Flow : 23 to 80°C	ISO 11359-2	7.2E-5 cm/cm/°C
Vicat softening temperature	--	ISO 306/B120	146 °C
		--	ISO 306/B50	145 °C
		--	ASTM D152510	145 °C
			ASTM D152510	145 °C

mechanical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414 WH9D279
Bending modulus	--5	ISO 178	2250 Mpa
		50.0mmSpan	ASTM D790	2230 Mpa
		50.0 mm Span4	ASTM D790	2230 Mpa
			ISO 178	2250 Mpa
bending strength	Yield,50.0mmSpan	ASTM D790	92.4 Mpa
			ISO 178	85.0 Mpa
		--5,6	ISO 178	85.0 Mpa
		Yield, 50.0 mm Span4	ASTM D790	92.0 Mpa
elongation	Yield	ISO 527-2/50	6.0 %
		Break	ASTM D638	98 %
		Break3	ASTM D638	98 %
		Yield	ASTM D638	6.0 %
		Yield3	ASTM D638	6.0 %
		Break	ISO 527-2/50	120 %
Tensile modulus		ASTM D638	2020 Mpa
		--2	ASTM D638	2020 Mpa
		--	ISO 527-2/1	2150 Mpa
			ISO 527-2/1	2150 Mpa
Tensile strain	Break	ISO 527-2/50	120 %
Tensile strain		Yield	ISO 527-2/50	6.0 %
tensile strength	Break	ASTM D638	50.3 Mpa
		Yield	ASTM D638	55.5 Mpa
		Yield	ISO 527-2/50	57.0 Mpa
		Break	ISO 527-2/50	60.0 Mpa
		Break3	ASTM D638	50.0 Mpa
		Yield3	ASTM D638	55.0 Mpa

Physical properties	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414 WH9D279
melt mass-flow rate	300°C/1.2 kg	ASTM D1238	10 g/10 min
melt mass-flow rate		300°C/1.2kg	ASTM D1238	10 g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	9.00 cm3/10min
Melt Volume Flow Rate (MVR)		300°C/1.2kg	ISO 1133	9.00 cm3/10min
Shrinkage rate	3.20 mm，Flow	Internal Method	0.40 - 0.80 %
Shrinkage rate		MD：3.20mm	Internal Method	0.40-0.80 %
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15 %
		Saturation,23°C	ISO 62	0.35 %
		Saturation, 23°C	ISO 62	0.35 %
		Equilibrium, 23°C, 50% RH	ISO 62	0.15 %

impact performance	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414 WH9D279
Charpy Notched Impact Strength	23°C	ISO 179/1eA	70 kJ/m²
Charpy Notched Impact Strength		-30°C	ISO 179/1eA	65 kJ/m²
Dart impact	23°C,TotalEnergy	ASTM D3763	70.0 J
Dart impact		23°C, Total Energy	ASTM D3763	70.0 J
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	60 kJ/m²
Impact strength of cantilever beam gap		23°C	ISO 180/1A	70 kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch		23°C	ISO 179/1eU	无断裂
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	无断裂
Suspended wall beam without notch impact strength		23°C	ISO 180/1U	无断裂

injection	Test Condition	Test Method	SABIC INNOVATIVE NANSHA/FXE1414 WH9D279
Back pressure			0.300 to 0.700 Mpa
drying temperature			120 °C
drying time			3.0 to 4.0 hr
Exhaust hole depth			0.025 to 0.076 mm
Mold temperature			70 to 95 °C
Processing (melt) temperature			295 to 315 °C
Screw speed			40 to 70 rpm
Spray nozzle temperature			290 to 310 °C
Suggested injection volume			40 to 60 %
Suggested maximum moisture content			0.020 %
Temperature at the front of the material cylinder			295 to 315 °C
Temperature at the rear of the barrel			270 to 295 °C
Temperature in the middle of the barrel			280 to 305 °C

Get App

Top