Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC EGN-2010KR MITSUBISHI ENGINEERING JAPAN
IUPILON™
fibre
High mobility,enhance,Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2010KR |
|---|---|---|---|
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 140 ℃(℉) |
| mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2010KR |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 3500 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 121 kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 4.1 % | |
| tensile strength | ASTM D638/ISO 527 | 75.0 kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2010KR |
|---|---|---|---|
| remarks | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2010KR |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.30-0.50 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.14 % |