plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM LU-02 JAPAN POLYPLASTIC
DURACON®
Bottle cap,Electronic and electrical components
UV resistance,Weather resistance,Low gloss
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
ColourNumberCF2001
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
Rockwell hardnessM-SaleISO 2039-280
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A82.0 °C
Linear coefficient of thermal expansionTD:23to55°CInternal Method1.2E-04 cm/cm/°C
MD:23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
Bending modulusISO 1782250 Mpa
bending strengthISO 17875.0 Mpa
Friction coefficientDynamic3JISK72180.37
Steel - Dynamic4JISK72180.70
Nominal tensile fracture strainISO 527-214 %
Tensile modulusISO 527-22450 Mpa
tensile strengthISO 527-257.0 Mpa
Wear factor0.49MPa,0.30m/sec5JISK7218<1.0 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72181000 10^-8mm³/N·m
0.49MPa,0.30m/sec6JISK7218200 10^-8mm³/N·m
0.060MPa,0.15m/sec8JISK72187200 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
Surface resistivityIEC 600936E+15 ohms
Volume resistivityIEC 600935E+13 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
densityISO 11831.39 g/cm³
melt mass-flow rate190°C/2.16kgISO 113322 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 113319.0 cm3/10min
Water absorption rate23°C,24hrISO 620.50 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
Charpy Notched Impact Strength23°CISO 179/1eA6.8 kJ/m²
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02
UL flame retardant ratingUL 94HB

Contact Us

Get App

Top