Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM YF-10 NC JAPAN POLYPLASTIC
DURACON®
Fitness equipment,Electrical field,Electronic field
wear resistant,enhance,High sliding
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Supplementary Information | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| ColourNumber | CF2001/CD3501 |
| hardness | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| Rockwell hardness | M-Scale | ISO 2039-2 | 80 |
| thermal performance | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 82.0 °C |
| Linear coefficient of thermal expansion | MD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C |
| TD:23to55°C | Internal Method | 1.2E-04 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| Bending modulus | ISO 178 | 2200 Mpa | |
| bending strength | ISO 178 | 72.0 Mpa | |
| Friction coefficient | Dynamic2 | JISK7218 | 0.32 |
| Steel - Dynamic3 | JISK7218 | 0.20 | |
| Nominal tensile fracture strain | ISO 527-2 | 14 % | |
| Tensile modulus | ISO 527-2 | 2350 Mpa | |
| tensile strength | ISO 527-2 | 54.0 Mpa | |
| Wear factor | 0.98MPa,0.30m/sec4 | JISK7218 | <1.0 10^-8mm³/N·m |
| 0.98MPa,0.30m/sec5 | JISK7218 | 60 10^-8mm³/N·m | |
| 0.060MPa,0.15m/sec6 | JISK7218 | 800 10^-8mm³/N·m | |
| 0.060MPa,0.15m/sec7 | JISK7218 | 6500 10^-8mm³/N·m |
| Electrical performance | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| Surface resistivity | IEC 60093 | 6E+15 ohms | |
| Volume resistivity | IEC 60093 | 9E+13 ohms·cm |
| Physical properties | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| density | ISO 1183 | 1.46 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 7.0 g/10min |
| Melt Volume Flow Rate (MVR) | 190°C/2.16kg | ISO 1133 | 6.00 cm3/10min |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.50 % |
| impact performance | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.3 kJ/m² |
| flammability | Test Condition | Test Method | JAPAN POLYPLASTIC/YF-10 NC |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |