plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM LU-02LV CF2001 JAPAN POLYPLASTIC
DURACON®
Bottle cap,Electronic and electrical components
UV resistance,Weather resistance,Low gloss
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02LV CF2001
Rockwell hardnessM-ScaleISO 2039-280
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02LV CF2001
ColourNumberCF2001
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02LV CF2001
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.2E-04 cm/cm/°C
TD:23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02LV CF2001
Bending modulusISO 1782100 Mpa
bending strengthISO 17872.0 Mpa
Friction coefficientDynamic2JISK72180.38
Steel - Dynamic3JISK72180.75
Nominal tensile fracture strainISO 527-220 %
Tensile modulusISO 527-22250 Mpa
tensile strengthISO 527-254.0 Mpa
Wear factor0.49MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK72181500 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72184000 10^-8mm³/N·m
0.49MPa,0.30m/sec5JISK7218600 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02LV CF2001
Surface resistivityIEC 600935E+15 ohms
Volume resistivityIEC 600937E+13 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/LU-02LV CF2001
melt mass-flow rate190°C/2.16kgISO 113319 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 113318.0 cm3/10min
Water absorption rate23°C,24hrISO 620.50 %