Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT 2002-2 CELANESE USA
--
currency
Processability,Moderate liquidity,Lubricity,currency
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | CELANESE USA/2002-2 |
|---|---|---|---|
| Glass transition temperature | ISO 11357-1 | 60 °C | |
| Hot deformation temperature | 0.45Mpa | ISO 75-1/-2 | 150 °C |
| 1.8Mpa | ISO 75-1/-2 | 55 °C | |
| Linear coefficient of thermal expansion | Across Flow | ISO 11359-2 | 1.27 E-4/℃ |
| Melting temperature | ISO 11357-1 | 225 °C | |
| UL flame retardant rating | UL 94 | HB | |
| Vicat softening temperature | ISO 306 | 190 °C |
| mechanical properties | Test Condition | Test Method | CELANESE USA/2002-2 |
|---|---|---|---|
| Bending modulus | 23℃ | ISO 178 | 2500 Mpa |
| bending strength | 23℃ | ISO 178 | 80 Mpa |
| Charpy Notched Impact Strength | 23℃ | ISO 179/1eA | 6 KJ/m |
| -30℃ | ISO 179/1eA | 6 KJ/m | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180/1A | 5.0 KJ/m |
| Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eU | NB KJ/m |
| -30℃ | ISO 179/1eU | 190 KJ/m | |
| Rockwell hardness | ISO 2039-2 | 78 M | |
| Tensile modulus | 50mm/min,Yield | ISO 527-2/1A | 4 % |
| 1mm/min | ISO 527-2/1A | 2600 Mpa | |
| tensile strength | ISO 527-2/1A | 60 Mpa | |
| Tensile stress | 50mm/min,Yield | ISO 527-2/1A | 60 Mpa |
| Electrical performance | Test Condition | Test Method | CELANESE USA/2002-2 |
|---|---|---|---|
| Compared to the Leakage Traceability Index (CTI) | IEC 60112 | 600 | |
| Dielectric dissipation factor | 100Hz | IEC 60250 | 14 E-4 |
| 1MHz | IEC 60250 | 220 E-4 | |
| Dielectric strength | IEC 60243-1 | 23 KV/mm | |
| Surface resistivity | IEC 60093 | 1E+15 Ohm | |
| Volume resistivity | 1MHz | IEC 60250 | 3.5 |
| 100Hz | IEC 60250 | 4 | |
| IEC 60093 | 1E+13 ohm.m |
| Physical properties | Test Condition | Test Method | CELANESE USA/2002-2 |
|---|---|---|---|
| density | ISO 1183 | 1310 kg/m | |
| Extreme Oxygen Index | ISO 4589 | 22 % | |
| Melt Volume Flow Rate (MVR) | ISO 1133 | 20 CM | |
| Shrinkage rate | ISO 294-4 | 1.8-2.0 % | |
| Water absorption rate | 23℃,Saturation | ISO 62 | 0.09 % |