plas
Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM WR-01 JAPAN POLYPLASTIC
DURACON®
Electronic and electrical components
Low moisture absorption
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
Rockwell hardnessM-ScaleISO 2039-280
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
ColourNumberCF2001
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A78.0 °C
Linear coefficient of thermal expansionMD：23to55°CInternal Method1.2E-04 cm/cm/°C
TD：23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
Bending modulusISO 1782200 Mpa
bending strengthISO 17876.0 Mpa
Friction coefficientDynamic2JISK72180.25
Steel - Dynamic3JISK72180.19
Nominal tensile fracture strainISO 527-238 %
Tensile modulusISO 527-22400 Mpa
tensile strengthISO 527-258.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721820 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK72183500 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK721810000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
Dielectric strength3.00mmIEC 60243-119 KV/mm
Surface resistivityIEC 600935E+13 ohms
Volume resistivityIEC 600931E+13 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
densityISO 11831.41 g/cm³
melt mass-flow rate190°C/2.16kgISO 113310 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 11338.00 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.8 %
MD:2.00mmISO 294-42.1 %
Water absorption rate23°C,24hrISO 621.2 %
impact performanceTest ConditionTest MethodJAPAN POLYPLASTIC/WR-01
Charpy Notched Impact Strength23°CISO 179/1eA5.6 kJ/m²

Contact Us

Get App

Top