Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPO SE100-701 SABIC INNOVATIVE US
NORYL™
Electronic communication plastic
Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/SE100-701 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTM D648 | 92.8 °C |
| 0.45MPa,Unannealed,6.40mm | ASTM D648 | 102 °C | |
| RTI Elec | UL 746 | 95.0 °C | |
| RTI Imp | UL 746 | 80.0 °C | |
| RTI Str | UL 746 | 95.0 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/SE100-701 |
|---|---|---|---|
| Bending modulus | 100mmSpan | ASTM D790 | 2310 Mpa |
| bending strength | Yield,100mmSpan | ASTM D790 | 82.7 Mpa |
| elongation | Yield | ASTM D638 | 6.5 % |
| Break | ASTM D638 | 25 % | |
| tensile strength | Yield | ASTM D638 | 57.9 Mpa |
| Break | ASTM D638 | 46.9 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/SE100-701 |
|---|---|---|---|
| Arc resistance | ASTM D495 | PLC7 | |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 1 |
| Dielectric constant | 1MHz | ASTM D150 | 2.57 |
| 50Hz | ASTM D150 | 2.66 | |
| 60Hz | ASTM D150 | 2.66 | |
| Dielectric strength | 3.20mm,inOil | ASTM D149 | 18 KV/mm |
| Dissipation factor | 1MHz | ASTM D150 | 2.6E-03 |
| 60Hz | ASTM D150 | 6E-03 | |
| 50Hz | ASTM D150 | 6E-03 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 4 |
| Surface resistivity | ASTM D257 | >1.0E+15 ohms | |
| Volume resistivity | ASTM D257 | 3.1E+16 ohms·cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/SE100-701 |
|---|---|---|---|
| Outdoor applicability | UL 746C | f1 | |
| Shrinkage rate | TD2 | Internal Method | 0.50-0.70 % |
| MD:3.20mm | Internal Method | 0.50-0.70 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/SE100-701 |
|---|---|---|---|
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 40.7 J |
| -30°C,EnergyatPeakLoad | ASTM D3763 | 16.3 J |
| flammability | Test Condition | Test Method | SABIC INNOVATIVE US/SE100-701 |
|---|---|---|---|
| Extreme Oxygen Index | ASTM D2863 | 33 % | |
| Radiation board grade | UL | YES | |
| UL flame retardant rating | 6.0mm | UL 94 | V-0 |
| 1.5mm | UL 94 | V-1 |